PL EN


Preferences help
enabled [disable] Abstract
Number of results
2014 | 126 | 1 | 112-113
Article title

Influence of the Production Method on Magnetization Processes of the Fe_{61}Co_{10}Y_{8}Mo_{1}B_{20} Bulk Amorphous Alloys

Content
Title variants
Languages of publication
EN
Abstracts
EN
The aim of this paper was to show the influence of the manufacturing method of bulk amorphous alloys on the resulting magnetization processes. Samples in the form of plates were prepared by the injection or suction of liquid alloy into a copper mould. In order to determine the type and quantity of structural defects present in the bulk amorphous alloys, the indirect method, i.e. the approach to the ferromagnetic saturation, was applied. Studies revealed the presence of conglomerates of point defects, for both alloys. These defects were pinning sites of domain walls and their number, size and type was found to have a direct impact on the coercive field. Alloy produced by the suction-casting method was found to possess the highest number of these defects, and thus a higher coercive field value.
Keywords
Contributors
author
  • Faculty of Materials Processing Technology and Applied Physics, Częstochowa University of Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland,
  • Faculty of Mechanical Enginering, Silesian Technical University, al. Konarskiego 18a, 44-100 Gliwice, Poland
  • Faculty of Materials Processing Technology and Applied Physics, Częstochowa University of Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland,
author
  • Faculty of Materials Processing Technology and Applied Physics, Częstochowa University of Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland,
author
  • Faculty of Mechanical Enginering, Silesian Technical University, al. Konarskiego 18a, 44-100 Gliwice, Poland
author
  • Faculty of Materials Processing Technology and Applied Physics, Częstochowa University of Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland,
author
  • Faculty of Materials Processing Technology and Applied Physics, Częstochowa University of Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland,
author
  • Faculty of Mechanical Enginering, Silesian Technical University, al. Konarskiego 18a, 44-100 Gliwice, Poland
References
  • [1] N.M. Hong, N.H. Dan, N.X. Phuc, J. Magn. Magn. Mater. 242-245, 847 (2002), doi: 10.1016/S0304-8853(01)01340-3
  • [2] H. Lee, W.T. Kim, D.H. Kim, Y.B. Kim, Mater. Sci. Eng. A 375-377, 336 (2004), doi: 10.1016/j.msea.2003.10.105
  • [3] T. Kulik, J. Non-Cryst. Solids 287, 145 (2001), doi: 10.1016/S0022-3093(01)00627-5
  • [4] A. Van Den Beukel, S. Radelaar, Acta Metall. 31, 419 (1983), doi: 10.1016/0001-6160(83)90219-5
  • [5] K. Sobczyk, J. Świerczek, J. Gondro, J. Zbroszczyk, W.H. Ciurzyńska, J. Olszewski, P. Brgiel, A. Łukiewska, J. Rzącki, M. Nabiałek, J. Magn. Magn. Mater. 324, 540 (2012), doi: 10.1016/j.jmmm.2011.08.038
  • [6] H. Kronmüller, J. Appl. Phys. 52, 1859 (1981), doi: 10.1063/1.329552
  • [7] N. Lenge, H. Kronmüller, Phys. Stat. Sol. A 95, 621 (1986), doi: 10.1002/pssa.2210950232
  • [8] H. Kronmüller, IEEE T. Magn. 15, 1218 (1979), doi: 10.1109/TMAG.1979.1060343
  • [9] M. Nabiałek, M. Dośpiał, M. Szota, P. Pietrusiewicz, Mater. Sci. Forum. 654-656, 1074 (2010), doi: 10.4028/www.scientific.net/MSF.654-656.1074
  • [10] M. Nabiałek, M. Szota, M. Dośpiał, P. Pietrusiewicz, S. Walters, J. Magn. Magn. Mater. 322, 3377 (2010), doi: 10.1016/j.jmmm.2010.06.030
  • [11] A. Łukiewska, J. Zbroszczyk, M. Nabiałek, J. Olszewski, J. Świerczek, W. Ciurzyńska, K. Sobczyk, M. Dośpiał, Arch. Met. Mater. 53, 881 (2008)
  • [12] T. Bitoh, A. Makino, A. Inoue, J. App. Phys. 99, 08F102 (2006), doi: 10.1063/1.2158587
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv126n1052kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.