PL EN


Preferences help
enabled [disable] Abstract
Number of results
2014 | 125 | 6 | 1380-1384
Article title

Modelling and Simulation of 3 Blade Helicopter's Rotor Model

Content
Title variants
Languages of publication
EN
Abstracts
EN
Results of model tests of a rotating composite beam with integrated piezoelectric active element are presented in the paper. A proposed electromechanical system is a simplified model of the structure of a modern helicopter rotor blade. Numerical analysis of the considered system is developed by means of the finite element method. In addition, the laboratory setup has been built in order to perform real experimental studies. Selected static and dynamic characteristics of the object are determined by a series of numerical simulations. The results are compared with the outcomes of tests performed on the experimental setup. A very good agreement between numerical simulation and experiment results is observed.
Keywords
Contributors
author
  • Department of Applied Mechanics, Lublin University of Technology, Lublin, Poland
author
  • Department of Applied Mechanics, Lublin University of Technology, Lublin, Poland
author
  • Department of Applied Mechanics, Lublin University of Technology, Lublin, Poland
author
  • Department of Electrical Drive Systems and Electrical Machines, Lublin University of Technology, Lublin, Poland
  • Induster Sp. z o.o., Lublin, Poland
References
  • [1] F. Georgiades, J. Latalski, J. Warmiński, Trans. Inst. Aviation 218, 36 (2011) http://ilot.edu.pl/PIL/PIL_218.pdf
  • [2] J. Latalski, F. Georgiades, J. Warmiński, J. Phys., Conf. Series 382, 012021 (2012), doi: 10.1088/1742-6596/382/1/012021
  • [3] L. Librescu, O. Song, Appl. Mech. Rev. 44, 174 (1991), doi: 10.1115/1.3121352
  • [4] W.-S. Hwang, H.C. Park, AIAA J. 5, 31 (1993), doi: 10.2514/3.11707
  • [5] M.W. Lin, A.O. Abatan, C.A. Rogers, J. Intellig. Mater. Syst. Struct. 6, 5 (1994), doi: 10.1177/1045389X9400500621
  • [6] M.C. Reaves, L.G. Horta, in: 42nd AIAA/ASME/ASCE/ASC Struct. Struct. Dynam. Mater. Conf., AIAA, Reston 2001, paper 2001-1466, doi: 10.2514/6.2001-1466
  • [7] P.C. Dumir, S. Kapuria, P. Kumari, J.K. Nath, ZAMM J. Appl. Math. Mechan. 1, 88 (2008), doi: 10.1002/zamm.200710359
  • [8] J. Latalski, Maintenance and Reliability 4, 72 (2011) http://www.ein.org.pl/sites/default/files/2011-04-11.pdf
  • [9] B.T. Wang, P.H. Chen, R.-L. Chen, J. Mechan. 2, 22 (2006), doi: 10.1017/S1727719100004408
  • [10] W. Jarzyna, M. Augustyniak, J. Warmiński, M. Bocheński, Przegląd Elektrotechniczny 7, 320 (2010) (in Polish) http://pe.org.pl/abstract_pl.php?nid=4048
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv125n634kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.