The Effect of Perlite Addition on Erosive Wear Behavior of Alumina Ceramics

• Authors: S. Tas , E. Ercenk , S. Yilmaz
• Languages of publication: EN

Abstracts

EN

In this study, the effects of perlite addition on mechanical properties and wear resistance of alumina ceramics were investigated. Alumina powders including perlite 5%, 10%, 15%, 20% and perlite free were prepared. These powders were shaped as rectangular by using uniaxial pressing system under the load of 100 MPa. The samples were sintered at 1400°C-1550C for 2 h and were subjected to some mechanical tests such as hardness and fracture toughness. X-ray diffraction analysis was employed to determine the crystalline phases. Bulk densities of the samples were measured. In addition, erosive wear test was performed to investigate the erosive wear resistance of the samples. The wear test results were presented depending on different sliding speed and sintering temperature. These results showed that perlite addition has a positive effect on erosive wear resistance of the alumina ceramics, generally.

Keywords

EN

81.05.Je; 81.05.Mh; 46.55.+d; 62.20.F-; 81.20.Ev

Discipline

• 81.05.Mh: Cermets, ceramic and refractory composites
• 62.20.F-: Deformation and plasticity(see also 83.50.-v Deformation and flow in rheology; for materials treatment effects on deformation, see 81.40.Lm)
• 81.05.Je: Ceramics and refractories (including borides, carbides, hydrides, nitrides, oxides, and silicides)(for ceramics in electrochemistry, see 82.45.Yz)
• 81.20.Ev: Powder processing: powder metallurgy, compaction, sintering, mechanical alloying, and granulation
• 46.55.+d: Tribology and mechanical contacts(see also 81.40.Pq Friction, lubrication and wear in materials science; 62.20.Qp Friction, tribology and hardness in mechanical properties of solids)

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2014
• Volume: 125
• Issue: 2
• Pages: 632-634

Dates

published

2014-02

Contributors

author

S. Tas

• Istanbul Technical University (ITU), Department of Mechanical Engineering, Gumussuyu, Istanbul 34437, Turkey

author

E. Ercenk

• Sakarya University, Engineering Faculty, Department of Metallurgical and Materials Engineering, Esentepe Campus, 54187 Sakarya, Turkey

author

S. Yilmaz

• Sakarya University, Engineering Faculty, Department of Metallurgical and Materials Engineering, Esentepe Campus, 54187 Sakarya, Turkey

References

• 1. Q. Fang, P. Sidky, M.G. Hocking, doi: 10.1016/S0261-3069(97)00081-2, Mater. Des. 18, 389 (1997)
• 2. E. Ercenk, U. Sen, S. Yilmaz, doi: 10.1016/j.triboint.2012.03.005, Tribol. Int. 52, 94 (2012)
• 3. M. Kalin, S. Novak, J. Vižintin, doi: 10.1016/S0043-1648(03)00326-0, Wear 254, 1141 (2003)
• 4. Y. Wang, S.M. Hsu, doi: 10.1016/0043-1648(95)06794-9, Wear 195, 90 (1996)
• 5. Y. Morita, K. Nakata, K. Ikeuchi, doi: 10.1016/S0043-1648(02)00296-X, Wear 254, 147 (2003)
• 6. Y. Wang, Y. Yang, Y. Zhao, W. Tian, H. Bian, J. He, doi: 10.1016/j.wear.2008.11.006, Wear 266, 1051 (2009)

Identifiers

DOI

10.12693/APhysPolA.125.632