PL EN


Preferences help
enabled [disable] Abstract
Number of results
2014 | 125 | 2 | 584-586
Article title

Properties of the Surface Alloyed AISI 1020 Steel with Fe_{(15-x)}Mo_{x}B_5 Alloy

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
It is now well established that considerable improvement in the mechanical/chemical properties of near surface regions of materials can be achieved by the process of surface alloying. In the present study, surface alloying treatment with molybdenum and boron on the surface of the AISI 1020 steel was realized by the technique of tungsten inert gas welding. Ferrous boron alloy and ferrous molybdenum were used for surface alloying treatment. Before the treatment, ferrous alloys were grinded and sieved to be smaller than 45 μm. Prepared powder was pressed on the steel substrate and melted by tungsten inert gas welding for surface alloying. Coated layers formed on the steel substrate were investigated using optical and scanning electron microscopy, X-ray diffraction analysis and Vickers microhardness testers. It was shown that surface alloyed layer has composite structure including steel matrix and well distributed boride phases. Borides formed in the coated layers have a small precipitated structure and distributed in the grain boundaries as continuous phases. X-ray diffraction analyses show that coated layers include Fe_2B, Fe_{13}Mo_2B_5, Mo_2FeB_4, and iron.
Keywords
Contributors
author
  • Sakarya University, Engineering Faculty, Department of Metallurgy and Materials Engineering, Esentepe Campus, 54187 Sakarya, Turkey
author
  • Sakarya University, Engineering Faculty, Department of Metallurgy and Materials Engineering, Esentepe Campus, 54187 Sakarya, Turkey
author
  • Sakarya University, Engineering Faculty, Department of Metallurgy and Materials Engineering, Esentepe Campus, 54187 Sakarya, Turkey
References
  • 1. A.K. Chattopadhyay, L. Chollet, H.E. Hintermann, doi: 10.1016/S0007-8506(07)62003-4, J. Mater. Sci. 26, 5093 (1991)
  • 2. Q.Y. Hou, J.S. Gao, F. Zhou, Surf. Coat. Technol. 194, 238 (2005)
  • 3. R.G. Wellman, J.R. Nicholls, doi: 10.1016/S0043-1648(00)00391-4, Wear 242, 80 (2000)
  • 4. M. Eroglu, N. Ozdemir, doi: 10.1016/S0257-8972(01)01712-1, Surf. Coat. Technol. 154, 209 (2002)
  • 5. K. Hyung-Jun, Y. Byoung-Hyun, L. Chang-Hee, doi: 10.1016/S0043-1648(01)00683-4, Wear 249, 846 (2002)
  • 6. J.C. Ion, Laser Processing of Engineering Materials: Principles, Procedure and Industrial Application, Elsevier, Oxford 2005, p. 266
  • 7. C. Fan, M.C. Chen, M.C. Chang, W. Wu, doi: 10.1016/j.surfcoat.2006.01.010, Surf. Coat. Technol. 201, 908 (2006)
  • 8. M. Zang, H. Wang, H. Wang, T. Cui, T. Cui, Y. Ma, J. Phys. Chem. C 114, 6722 (2010)
  • 9. U. Sen, S.S. Pazarlioglu, S. Sen, doi: 10.1016/j.matlet.2007.12.042, Mater. Lett., 2444 (2008)
  • 10. S.A. Kuznetsov, S.V. Kuznetsova, E.V. Rebrov, M.J.M. Mies, M.H.J.M. de Croon, J.C. Schouten, doi: 10.1016/j.surfcoat.2004.05.021, Surf. Coat. Technol. 195, 182 (2005)
  • 11. ASTM E407-07e1: Standard Practice for Microetching Metals and Alloys
  • 12. V. Raghavan, J. Phase Equilibria 24, 449 (2003)
  • 13. L. Qin, K. Yang, C. Liu, B. Tang, doi: 10.1016/j.matlet.2012.05.069, Mater. Lett. 82, 127 (2012)
  • 14. M. Eroglu, doi: 10.1016/j.surfcoat.2009.02.010, Surf. Coat. Technol. 203, 2229 (2009)
  • 15. L. Bourithis, G. Papadimitriou, doi: 10.1016/S0167-577X(02)01077-7, Mater. Lett. 57, 1835 (2003)
  • 16. B. Aronsson, T. Lundström, Borides, Silicides, and Phosphides: A Critical Review of Their Preparation, Properties and Crystal Chemistry, Methuen, London1965, p. 118
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv125n2134kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.