PL EN


Preferences help
enabled [disable] Abstract
Number of results
2014 | 125 | 2 | 526-528
Article title

Development of a Polymer Based Syntactic Foam for High Temperature Applications

Content
Title variants
Languages of publication
EN
Abstracts
EN
Syntactic foams are one of the most widely used close cell structured foams. They are used in applications for naval, aeronautical, aerospace, civil, industrial, and automotive engineering due to good acoustical attenuation, excellent strength to weight ratio, vibration isolation, and dielectric properties. These foams are fabricated by incorporation of hollow particles in a matrix material. The most preferred matrix materials are polymers. In this study silicone resin (useful temperature range - 53C to 232°C) was selected as a binder material. Glass bubbles were incorporated into the silicone resin at three different mass percentages (10%, 20%, and 30%). The density of the silicone was reduced more than 50% by 30% glass bubble contribution. The foam mechanical properties were investigated in a room temperature and after heat treatment at 500C by quasi-static compression experiments. Microstructural transitions by the temperature raises were examined by using scanning electron microscopy pictures. It was observed that the increase of glass bubble percentage in silicone rubber enhanced the energy absorption properties in the heat treated and room temperature specimens. Plateau stress and densification amount were improved under quasi-static compression load by the glass bubble percentage increase. It can be said that developed syntactic foams can be used in heat resistant, low weight and high compression strength exigencies.
Keywords
Contributors
author
  • Uludag University, Eng. Arch. Faculty, Automotive Eng. Dept., 16059 Bursa, Turkey
author
  • University of Rhode Island, Dept. of Mech., Ind. and Sys. Eng., Kingston, RI, USA
author
  • University of Rhode Island, Dept. of Mech., Ind. and Sys. Eng., Kingston, RI, USA
author
  • Uludag University, Faculty of Science and Arts, Department of Physics, 16059 Bursa, Turkey
author
  • Uludag University, Faculty of Science and Arts, Department of Physics, 16059 Bursa, Turkey
References
  • 1. N. Gupta, V.C. Shunmugasamy, doi: 10.1016/j.msea.2011.06.073, Mater. Sci. Eng. A 528, 7596 (2011)
  • 2. V. Shabde, K. Hoo, G. Gladysz, doi: 10.1007/s10853-006-7637-x, J. Mater. Sci. 41, 4061 (2006)
  • 3. G. Gladysz, B. Perry, G. McEachen, J. Lula, doi: 10.1007/s10853-006-7646-9, J. Mater. Sci. 41, 4085 (2006)
  • 4. N. Gupta, E. Woldesenbet, P. Mensah, doi: 10.1016/j.compositesa.2003.08.001, A. Compos. Appl. Sci. Manuf. 35, 103 (2004)
  • 5. N. Gupta, K. Kishore, E. Woldesenbet, S. Sankaran, doi: 10.1023/a:1017986820603, J. Mater. Sci. 36, 4485 (2001)
  • 6. R. Poveda, S. Achar, N. Gupta, doi: 10.1007/s11837-012-0402-5, JOM J. Miner. Met. Mater. Soc. 64, 1148 (2012)
  • 7. M. Dimchev, R. Caeti, N. Gupta, doi: 10.1016/j.matdes.2009.09.007, Mater. Des. 31, 1332 (2010)
  • 8. V.T. Phan, D. Choqueuse, J.Y. Cognard, L. Sohier, doi: 10.1016/j.porgcoat.2012.09.028, Prog. Org. Coat. 76, 341 (2013)
  • 9. C.I. Stuckey, T.R. Reinarts, D. Davis, doi: 10.1063/1.1357938, AIP Conf. Proc. 552, 98 (2001)
  • 10. F. Grosjean, N. Bouchonneau, D. Choqueuse, V. Sauvant-Moynot, doi: 10.1007/s10853-008-3166-0, J. Mater. Sci. 44, 1462 (2009)
  • 11. N. Bouchonneau, V. Sauvant-Moynot, D. Choqueuse, F. Grosjean, E. Poncet, D. Perreux, doi: 10.1016/j.petrol.2010.03.023, J. Petrol. Sci. Eng. 73, 1 (2010)
  • 12. A. Corigliano, E. Rizzi, E. Papa, doi: 10.1016/S0266-3538(00)00118-4, Compos. Sci. Technol. 60, 2169 (2000)
  • 13. L. Bardella, F. Genna, doi: 10.1016/S0020-7683(00)00025-1, Int. J. Solids Struct. 38, 307 (2001)
  • 14. E.S. Weiser, T.F. Johnson, T.L.S. Clair, Y. Echigo, H. Kaneshiro, doi: 10.1088/0954-0083/12/1/301, High Perform. Polym. 12, 1 (2000)
  • 15. V. Shunmugasamy, D. Pinisetty, N. Gupta, doi: 10.1007/s10853-012-6452-9, J. Mater. Sci. 47, 5596 (2012)
  • 16. M. Porfiri, N. Nguyen, N. Gupta, doi: 10.1007/s10853-008-3040-0, J. Mater. Sci. 44, 1540 (2009)
  • 17. T. Lin, N. Gupta, A. Talalayev, doi: 10.1007/s10853-008-3074-3, J. Mater. Sci. 44, 1520 (2009)
  • 18. T. Muthukumar, A. Aravinthan, K. Lakshmi, R. Enkatesan, L. Vedaprakash, M. Doble, doi: 10.1016/j.ibiod.2010.11.012, Int. Biodeterior. Biodegrad. 65, 76 (2011)
  • 19. M. Kessler, A. Schnettler, doi: 10.1109/TDEI.2010.5492264, IEEE Trans. Dielectr. Electr. Insul. 17, 898 (2010)
  • 20. http://www.smooth-on.com/Silicone-Rubber-an/c2/index.html
  • 21. http://www.3M.com/oilandgas
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv125n2117kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.