Investigation of Mechanical and Dry Sliding Wear Behaviours of AlB_2/PE Polymer Matrix Composites

• Authors: Ö. Savaş , F. Ficici , R. Kayikci , S. Köksal
• Languages of publication: EN

Abstracts

EN

In this study, mechanical and wear behaviour of polymer-boride composite (AlB_2/PE) materials produced through pressure moulding technique have been experimentally investigated. Three different composite materials that include 5 wt%, 10 wt%, and 20 wt% AlB_2 reinforcement phase were tested using pin-on-disk arrangement. Compared with the matrix, the 20 wt% AlB_2 composite shows a 71% increase in the ultimate tensile strength and the highest wear resistance.

Keywords

EN

81.40.Pq; 81.05.Lg

Discipline

• 81.05.Lg: Polymers and plastics; rubber; synthetic and natural fibers; organometallic and organic materials(for polymers and organic materials in electrochemistry, see 82.45.Wx)
• 81.40.Pq: Friction, lubrication, and wear

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2014
• Volume: 125
• Issue: 2
• Pages: 388-390

Dates

published

2014-02

Contributors

author

Ö. Savaş

• Yildiz Technical University, Faculty of Naval Architecture and Maritime, Istanbul, Turkey

author

F. Ficici

• Sakarya University, Faculty of Technology, Sakarya, Turkey

author

R. Kayikci

• Sakarya University, Faculty of Technology, Sakarya, Turkey

author

S. Köksal

• Sakarya University, Faculty of Technology, Sakarya, Turkey

References

• 1. O. Jacobs, M. Kazanci, D. Cohn, G. Marom, doi: 10.1016/S0043-1648(02)00110-2, Wear 253, 618 (2002)
• 2. X. Yang, W. Wei, J. Olaf, S. Birgit, doi: 10.1016/j.polymertesting.2005.10.005, Polym. Test 25, 221 (2006)
• 3. J. Tong, Y. Ma, M. Jiang, doi: 10.1016/S0043-1648(03)00221-7, Wear 255, 734 (2003)
• 4. H. Unal, U. Sen, A. Mimaroglu, doi: 10.1016/j.triboint.2004.03.002, Tribol. Int. 37, 727 (2004)
• 5. S. Jeamtrakull, A. Kositchaiyong, T. Markpin, V. Rosarpitak, N. Sombatsompop, doi: 10.1016/j.compositesb.2012.04.031, Compos. Part B, Eng. 43, 2721 (2012)
• 6. N.S.M. El-Tayeb, B.F. Yousif, doi: 10.1016/j.wear.2006.11.015, Wear 262, 1140 (2007)
• 7. M. Zhang, X. Wang, X. Fu, Y. Xia, doi: 10.1016/j.triboint.2009.02.012, Tribol. Int. 42, 1029 (2009)
• 8. Y.-X. Lin, C. Gao, M. Chen, doi: 10.1243/13506501JET590, Part J, J. Eng. Tribol. 223, 1013 (2009)
• 9. G. Guofang, Y. Huayong, F. Xin, doi: 10.1016/S0043-1648(03)00394-6, Wear 256, 88 (2004)
• 10. D. Xiang, C. Gu, doi: 10.1016/j.matlet.2005.09.061, Mater. Lett. 60, 689 (2006)
• 11. H. Unal, F. Findik, A. Mimaroglu, doi: 10.1002/app.11927, J. Appl. Polym. Sci. 88, 1694 (2003)
• 12. V.K. Srivasstava, J.P. Pathak, K. Tahzibi, doi: 10.1016/0043-1648(92)90131-Q, Wear 152, 343 (1992)
• 13. D. Gan, S. Lu, C. Song, Z. Wang, doi: 10.1016/S0014-3057(01)00010-6, Eur. Polym. J. 37, 1359 (2001)
• 14. B.A. Mudasar Pasha Abdul, D. Budan, S. Basavarajappa, S. Manjunath Yadav, B.A. Nizamuddin, doi: 10.1177/0892705712446801, J. Thermoplast. Compos. 26, 243 (2013)
• 15. D. Li, Y. You, X. Deng, W. Li, Y. Xie, doi: 10.1016/j.matdes.2012.11.011, Mater. Design 46, 809 (2013)
• 16. L. Chang, Z. Zhang, H. Zhang, A.K. Schlarb, doi: 10.1016/j.compscitech.2005.02.021, Compos. Sci. Tech. 66, 3188 (2006)
• 17. P.S. Cooper, M.A. Kearns, doi: 10.4028/www.scientific.net/MSF.217-222.141, Mater. Sci. Forum 217-222, 141 (1996)
• 18. T. Wang, Z. Chen, H. Fu, J. Xu, Y. Fu, T. Li, doi: 10.1016/j.scriptamat.2011.03.001, Scr. Mater. 64, 1121 (2011)
• 19. C. Deppisch, G. Liu, A. Hall, Y. Xu, A. Zangvil, J.K. Shang, doi: 10.1557/JMR.1998.0476, J. Economy, J. Mater. Res. 12-13, 3485 (1998)
• 20. O. Savas, R. Kayikci, S. Koksal, Adv. Compos. Lett. 21, 44 (2012)
• 21. A.C. Hall, doi: 10.1007/s11837-000-0046-8, J. Economy, J. Mater. 52, 42 (2000)
• 22. C. Deppisch, G. Liu, J.K. Shang, doi: 10.1016/S0921-5093(96)10575-X, J. Economy, Mater. Sci. Eng. A 225, 153 (1997)
• 23. O. Jacobs, M. Kazanci, D. Cohn, G. Marom, doi: 10.1016/S0043-1648(02)00110-2, Wear 253, 618 (2002)
• 24. L. Zhao, L. Zheng, S. Zhao, doi: 10.1016/j.matlet.2006.01.042, Mater. Lett. 60, 2590 (2006)
• 25. H. Meng, G.X. Sui, G.Y. Xie, R. Yang, doi: 10.1016/j.compscitech.2008.12.004, Compos. Sci. Tech. 69, 606 (2009)

Identifiers

DOI

10.12693/APhysPolA.125.388