PL EN


Preferences help
enabled [disable] Abstract
Number of results
2014 | 125 | 2 | 313-315
Article title

The Influence of Different Resin Cements and Pretreatments on the Bond Strength between Zirconia and Cement

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
The aim of this study was to analyze the influence of various luting materials and surface treatments on adhesive strength for zirconia ceramics and luting cements. The zirconia framework specimens were made into cylinders. Prior to cement, zirconia framework specimens underwent various surface treatments (sandblasting with 110 μm Al_2O_3 particles, milling with 240-grift silicon sand paper and silanization). Resin luting cement and glass ionomer luting cement were then applied on the surface of zirconia specimens. The specimens were then subjected to a shear force. The fractured surfaces were visually analyzed by scanning electron microscopy. The shear bond strength values of resin luting cement bonded to zirconia specimens were significantly higher than glass ionomer luting cement bonded to zirconia specimens (P < 0.05). The shear bond strength values of zirconia specimens sandblasted with 110 μm Al_2O_3 particles were significantly higher than those milled with silicon carbide papers and underwent silanization (P < 0.05). The shear bond strength values of zirconia specimens milled with silicon carbide papers and underwent silanization were not significantly different (P < 0.05). The highest shear bond strength values were achieved when the zirconia specimens were sandblasted and bonded to resin luting cement. Airborne-particle abrasion was an effective method which could enhance the bond strength of zirconia ceramics and cements. The resin luting cement exhibited a higher bond to zirconia than glass ionomer luting cement.
Keywords
EN
Publisher

Year
Volume
125
Issue
2
Pages
313-315
Physical description
Dates
published
2014-02
Contributors
author
  • The Medical Centre of Stomatology, the 1st Affiliated Hospital of Jinan University, Guangzhou 510630, China
author
  • Department of Stomatology, Nanfang Hospital, Southern Medical University, Guangzhou 510515, China
author
  • Department of Stomatology, Nanfang Hospital, Southern Medical University, Guangzhou 510515, China
author
  • Department of Stomatology, Nanfang Hospital, Southern Medical University, Guangzhou 510515, China
References
  • 1. T. Derand, M. Molin, K. Kvam, doi: 10.1016/j.dental.2005.02.005, Dent. Mater. 21, 1158 (2005)
  • 2. M. Rosentritt, D. Steiger, M. Behr, G. Handel, C. Kolbeck, doi: 10.1016/j.jdent.2009.08.003, J. Dent. 37, 978 (2009)
  • 3. E. Asmussen, A. Peutzfeldt, doi: 10.1016/j.dental.2004.12.004, Dent. Mater. 21, 1039 (2005)
  • 4. H. Yamaguchi, S. Ino, N. Hamano, S. Okada, T. Teranaka, doi: 10.4012/dmj.2011-237, Dent. Mater. J. 31, 472 (2012)
  • 5. J.R. Queiroz, P. Benetti, M. Massi, L.N. Junior, A. Della Bona, doi: 10.1016/j.dental.2012.03.014, Dent. Mater. 28, 763 (2012)
  • 6. V.C. Bachhav, M.A. Aras, doi: 10.4047/jap.2012.4.2.76, Quintessence Int. 42, 173 (2011)
  • 7. G.A. Borges, A.M. Sophr, M.F. de Goes, L.C. Sobrinho, D.C. Chan, doi: 10.1016/S0022-3913(02)52704-9, J. Prosthet. Dent. 89, 479 (2003)
  • 8. A. Sundh, G. Sjögren, doi: 10.1016/j.dental.2005.11.006, Dent. Mater. 22, 778 (2006)
  • 9. A. Della Bona, M. Borba, P. Benetti, D. Cecchetti, doi: 10.1590/S1806-83242007000100002, Braz. Oral. Res. 21, 10 (2007)
  • 10. S. Karakoca, H. Yilmaz, doi: 10.1002/jbm.b.31477, J. Biomed. Mater. Res. B Appl. Biomater. 91, 930 (2009)
  • 11. C.J. Kleverlaan, R.N. van Duinen, A.J. Feilzer, doi: 10.1016/S0109-5641(03)00067-8, Dent. Mater. 20, 45 (2004)
  • 12. Y.H. Son, C.H. Han, S. Kim, doi: 10.1016/j.jdent. 2012.07.007, J. Dent. 40, 866 (2012)
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv125n2047kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.