PL EN


Preferences help
enabled [disable] Abstract
Number of results
2013 | 123 | 6 | 1016-1019
Article title

Model of the Gears Based on Multibody System and Its Validation by Application of Non-Contact Methods

Content
Title variants
Languages of publication
EN
Abstracts
EN
In the paper an application of laser measurements for validation of the gears dynamic model have been presented. The model of the gears was compared with an experimental data in case of diagnostics of manufacturing failures. The comparison was done on the basis of vibration signals generated by the model and the real object. In the experiment correct work as well as incorrect one of the gears was studied. Purpose of the paper is to compare the model with the experimental data; to this end, the Multibody model of the gears was build in MSC ADMS software. The model consists of two gears and two shafts, with both gears and shafts treated as rigid bodies, but contact surfaces between them are flexible. To conclude, in the study comparison of acceleration signals estimates behavior due to other gears faults in the experiment and in the model has been presented. For optimal model validation, laser measurements on the shaft in the experiment were conducted.
Keywords
EN
Contributors
author
  • AGH - University of Science and Technology, Faculty of Mechanical Engineering and Robotics Department of Mechanics and Vibroacoustics, al. A. Mickiewicza 30, 30-059 Krakow, Poland
author
  • AGH - University of Science and Technology, Faculty of Mechanical Engineering and Robotics Department of Mechanics and Vibroacoustics, al. A. Mickiewicza 30, 30-059 Krakow, Poland
author
  • AGH - University of Science and Technology, Faculty of Mechanical Engineering and Robotics Department of Mechanics and Vibroacoustics, al. A. Mickiewicza 30, 30-059 Krakow, Poland
  • Department of Mechanical Engineering, University of Guanajuato Carretera Salamanca-Valle de Santiago km 3.5+1.8, Comunidad de Palo Blanco Salamanca, Guanajuato. CP 36885, Mexico
References
  • [1] C. Cempel, Vibroacoustics Diagnostics, Państwowe Wydawnictwo Naukowe, Warszawa 1989, (in Polish)
  • [2] R.B. Randall, Vibration-based Condition Monitoring, Industrial, Aerospace and Automotive Applications, Wiley and Sons, Chichester 2011
  • [3] J. Adamczyk, P. Krzyworzeka, W. Cioch, Archiv. Acoust. 30, 274 (2005)
  • [4] D. Dąbrowski, W. Cioch, Acta Phys. Pol. A 119, 946 (2011)
  • [5] M. Inalpolat, A. Kahraman, J. Sound Vib. 323, 677 (2009)
  • [6] C. Molina Vicuna, Forsch. Ingenieurwiesen 76, 15 (2012)
  • [7] D. Kong, J.M. Meagher, C. Xu, X. Wu, Y. Wu, in: IMAC XXVI Conference and Exposition on Structural Dynamics, Orlando-Florida, 2008
  • [8] B.K. Han, M.K. Cho, C. Kim, C.H. Lim, J.J. Kim, Int. J. Automot. Techn. 10, 469 (2009)
  • [9] A. Sommer, J. Meagher, X. Wu, Modell. Sim. Eng. 2011, 1 (2011)
  • [10] X. Wu, J. Meagher, A. Sommer, Structural Health Monitoring, Shock and Vibration 5, 203 (2011)
  • [11] M. Wojtyra, J. Frączek, A Multibody Method in Dynamics, Oficyna Wydawnicza Politechniki Warszawskiej, 1 Ed., Warszawa 2007 (in Polish)
  • [12] A.A. Shabana, Dynamics of Multibody Systems, Cambridge University Press, 3 Ed., Cambridge 2005
  • [13] L. Muler, Dynamics of Toothed Gears, Wydawnictwo Naukowo-Techniczne, Warszawa 1986, (in Polish)
  • [14] K.L. Johnson, Contact Mechanics, Cambridge University Press, Cambridge 1985
  • [15] MSC ADAMS, Help Documentation (ADAMS/Solver), MSC.Software, Cambridge 2010
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv123n611kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.