PL EN


Preferences help
enabled [disable] Abstract
Number of results
2013 | 123 | 2 | 470-472
Article title

Study of the Relation between Microstructure and Properties (Mechanical/Electrical) of Copper Wire Drawing and Annealed

Content
Title variants
Languages of publication
EN
Abstracts
EN
The aim of this study is to clarify the relation between microstructure and properties (hardness and electrical resistivity) of copper wire drawing by the ENICAB Company and distended for electrical cabling. In this work we studied the evolution of the microstructure and (mechanical/electrical) properties of the wire drawn and annealed at 260°C. The drawing causes structural anisotropy that results in an elongation of grains along the axis of drawing. There was also an increase in electrical resistivity and in hardness following the deformation level increases. After annealing at 260C of the drawn wire, it was found a gradual return of the mechanical properties and microstructure to a state close to the state of as-received copper.
Keywords
EN
Publisher

Year
Volume
123
Issue
2
Pages
470-472
Physical description
Dates
published
2013-02
Contributors
author
  • Laboratoire de Génie Energétique et Matériaux, LGEM, Université de Biskra, B.P:145, Biskra 07000, Algeria
author
  • Laboratoire de Génie Energétique et Matériaux, LGEM, Université de Biskra, B.P:145, Biskra 07000, Algeria
author
  • Laboratoire de Génie Energétique et Matériaux, LGEM, Université de Biskra, B.P:145, Biskra 07000, Algeria
author
  • CNRS, UMR8182, ICMMO, Laboratoire de Physico-Chimie de l'Etat Solide, Orsay, F-91405, France
  • University Paris-Sud, Orsay, F-91405, France
author
  • Laboratoire de Génie Energétique et Matériaux, LGEM, Université de Biskra, B.P:145, Biskra 07000, Algeria
author
  • Laboratoire de Génie Energétique et Matériaux, LGEM, Université de Biskra, B.P:145, Biskra 07000, Algeria
author
  • Laboratoire Léon Brillouin, CEA(DSM-DRECAM)-CNRS, CEA Saclay, 91191 Gif sur Yvette, France
References
  • [1] M. Zidani, Z. Boumerzoug, T. Baudin, R. Penelle, Mater. Sci. Forum 514-516, 554 (2006)
  • [2] M. Zidani, Z. Boumerzoug, T. Baudin, D. Solas, Mater. Sci. Forum 550, 447 (2007)
  • [3] M. Zidani, S. Messaoudi, T. Baudin, D. Solas, M.H. Mathon, Int. J. Mater. Form. 3, 7 (2010)
  • [4] Z. Boumerzoug, N. Lahraki, M. Zidani, Mater. Sci. Forum. 467-470, 235 (2004)
  • [5] S. Jakani, T. Baudin, C.-H. de Novion, M.-H. Mathon, Mater. Sci. Eng. A 456, 261 (2007)
  • [6] S. Jakani, Ph.D. Thesis, University Paris XI, 2004
  • [7] M. Zidani, S. Messaoudi, C. Derfouf, A. Boulagroun, M.H. Mathon, T. Baudin, AIP Conf. Proc. 1400, 579 (2011)
  • [8] N. Takata, S.H. Lee, N. Tsuji, Mater. Lett. 63, 1757 (2009)
  • [9] S. Çetinarslan, Mater. Design 30, 671 (2009)
  • [10] M. Niewczas, O. Engler, J.D. Embury, Acta Mater. 52, 539 (2004)
  • [11] G. Mohamed, B. Bacroix, Acta Mater. 48, 3295 (2000)
  • [12] C. Kittel, Physics of Solids, Dunod, Paris 1998 (in French)
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv123n2103kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.