Boriding of Equiatomic Fe-Mn Binary Alloy

• Authors: A. Calik , Y. Gencer , M. Tarakci , K. Gunduz , A. Gulec
• Languages of publication: EN

Abstracts

EN

Synthetic equiatomic Fe-Mn binary alloy was prepared under vacuum-argon controlled atmosphere. Fe-Mn alloy samples were boronized using the commercial Ekabor II powder at 900°C, 1000C and 1100C for 3 h. The borided samples were characterized by X-ray diffraction, scanning electron microscopy-energy dispersive spectroscopy, and profilometry. The boride layers were composed of FeB, MnB, MnB_2 and Fe_2B phases for the samples borided at 1000C and 1100C while the sample borided at 900C was composed of only FeB and MnB. The boride layer was well adhered to the substrate with saw-tooth like morphology however some discontinuous band of cracks were observed in the boride layer. The concentration ratio of Fe and Mn were equal along the thickness of the coating though in some areas their ratio interchanged. The boride layer thickness and surface roughness increased with boronizing temperature.

Keywords

EN

81.15.-z; 81.05.Bx; 68.35.Fx

Discipline

• 81.05.Bx: Metals, semimetals, and alloys
• 68.35.Fx: Diffusion; interface formation(see also 66.30.-h Diffusion in solids, for diffusion of adsorbates, see 68.43.Jk)
• 81.15.-z: Methods of deposition of films and coatings; film growth and epitaxy(for structure of thin films, see 68.55.-a; see also 85.40.Sz Deposition technology in microelectronics; for epitaxial dielectric films, see 77.55.Px)

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2013
• Volume: 123
• Issue: 2
• Pages: 449-452

Dates

published

2013-02

Contributors

author

A. Calik

• Faculty of Technology, Manufacturing Engineering, Suleyman Demirel University, Isparta, Turkey

author

Y. Gencer

• Gebze Institute of Technology, Department of Materials Science and Engineering, Gebze, Kocaeli, Turkey

author

M. Tarakci

• Gebze Institute of Technology, Department of Materials Science and Engineering, Gebze, Kocaeli, Turkey

author

K. Gunduz

• Gebze Institute of Technology, Department of Materials Science and Engineering, Gebze, Kocaeli, Turkey

author

A. Gulec

• Gebze Institute of Technology, Department of Materials Science and Engineering, Gebze, Kocaeli, Turkey

References

• [1] I. Ozbek, C. Bindal, Surf. Coat. Technol. 154, 14 (2002)
• [2] A.K. Sinha, in: ASM International Handbook, Vol. 4 Heat Treating, Materials Park (Oh) 1991 p. 437
• [3] P.A.D.A.T. Bell, Surf. Eng. 1, 203 (1985)
• [4] G. Palombarini, M. Carbucicchio, J. Mater. Sci. Lett. 3, 791 (1984)
• [5] C. Martini, G. Palombarini, M. Carbucicchio, J. Mater. Sci. 39, 933 (2004)
• [6] I. Celikyurek, B. Baksan, O. Torun, R. Gurler, Intermetallics 14, 136 (2006)
• [7] M. Carbucicchio, G. Palombarini, J. Mater. Sci. Lett. 6, 1147 (1987)
• [8] M. Carbucicchio, G. Palombarini, G. Sambogna, J. Mater. Sci. 19, 4035 (1984)
• [9] Y. Gencer, M. Tarakci, A. Calik, Surf. Coat. Technol. 203, 9 (2008)
• [10] M. Carbucicchio, G. Palombarini, G. Sambogna, Hyperfine Interact. 92, 993 (1994)
• [11] G. Principi, A. Gupta, C. Badini, Hyperfine Interac. 69, 479 (1991)
• [12] C.M. Brakman, A.W.J. Gommers, E.J. Mittemeijer, J. Mater. Res. 4, 1354 (1989)
• [13] C. Badini, C. Gianoglio, G. Pradelli, J. Mater. Sci. 21, 1721 (1986)
• [14] G. Palombarini, M. Carbucicchio, L. Cento, J. Mater. Sci. 19, 3732 (1984)
• [15] M. Carbucicchio, G. Meazza, G. Palombarini, J. Mater. Sci. 17, 3123 (1982)
• [16] D.K. Subramanyam, in: Properties and Selection: Irons Steels and High Performance Alloys, Materials Park (Oh) 1991 p. 1951
• [17] M. Bektes, A. Calik, N. Ucar, M. Keddam, Mater. Character. 61, 233 (2010)
• [18] H. Hermawan, D. Dube, D. Mantovani, J. Biomed. Mater. Res. Part A 93A, 1 (2010)
• [19] Y.K. Lee, S.H. Baik, J.C. Kim, C.S. Choi, J. Alloys Comp. 355, 10 (2003)
• [20] J.H. Jun, C.S. Choi, Scr. Mater. 38, 543 (1998)
• [21] R.D. Fu, Y.Z. Zheng, Y.B. Ren, J. Mater. Eng. Perform. 10, 456 (2001)

Identifiers

DOI

10.12693/APhysPolA.123.449