PL EN


Preferences help
enabled [disable] Abstract
Number of results
2013 | 123 | 2 | 421-423
Article title

The Influence of Process Parameters of EDM on the Surface Roughness of Aluminum Matrix Composites Reinforced with SiC Particulates

Content
Title variants
Languages of publication
EN
Abstracts
EN
This paper investigates the effect of electrical discharge machining parameters on the surface roughness as an alternative method for machining of Al/SiC_{p} metal matrix composites produced with the powder metallurgy. Current, electrode type, pulse-on-time, particle reinforcement weight ratio and voltage were used as the process parameters. An experimental plan (L_{18}) was constituted by using the Taguchi orthogonal design. Results of experiments showed that pulse-on-time (34%) and current (31.26%) is the most influencing parameters. Besides this, the percentage contribution of particle reinforcement on the surface roughness is 6.71%.
Keywords
EN
Year
Volume
123
Issue
2
Pages
421-423
Physical description
Dates
published
2013-02
References
  • [1] R. Ji, Y. Liu, Y. Zhang, F. Wang, Int. J. Refract. Met. Hard Mater. 29, 117 (2011)
  • [2] S. Clijsters, K. Liu, D. Reynaerts, B. Lauwers, J. Mater. Proc. Technol. 210, 631 (2010)
  • [3] P.K. Patowari, P. Saha, P.K. Mishra, Int. J. Adv. Manuf. Technol. 54, 593 (2011)
  • [4] A.A. Khan, Int. J. Adv. Manuf. Technol. 39, 482 (2008)
  • [5] I.A. Al-Darrab, Z.A. Khan, M.A. Zytoon, S.I. Ishrat, Int. J. Quality Reliabil. Manag. 26, 469 (2009)
  • [6] C.C. Wang, H.M. Chow, L.D. Yang, C.T. Lu, J. Mater. Proc. Technol. 209, 4134 (2009)
  • [7] Y.C. Lin, Y.F. Chen, D.A. Wang, L. Ho-Shiun, J. Mater. Proc. Technol. 209, 3374 (2009)
Document Type
Publication order reference
YADDA identifier
bwmeta1.element.bwnjournal-article-appv123n2088kz
Identifiers
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.