Characterization of Machined Surface by EDM for Al/B_4C_{p} Composite Material

• Authors: S. Kasman , L. Feray Guleryuz , S. Ozan , R. Ipek
• Languages of publication: EN

Abstracts

EN

In this study, electrical discharge machining process was performed to investigate the machinability of Al/B_4C_p metal matrix composites manufactured by powder metallurgy. For this, an experimental layout was conducted by using full factorial design. In the analysis, there are three parameters of which one is at three levels and the remaining are two levels. Totally, 48 experiments were carried out. The surface roughness (R_{a}) was increased with increasing the current (C), pulse-on-time (T_{on}), pulse-off-time (T_{off}) and amount of particle (PR).

Keywords

EN

81.05.Ni; 81.20.Ev; 81.20.Wk

Discipline

• 81.05.Ni: Dispersion-, fiber-, and platelet-reinforced metal-based composites
• 81.20.Wk: Machining, milling
• 81.20.Ev: Powder processing: powder metallurgy, compaction, sintering, mechanical alloying, and granulation

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2013
• Volume: 123
• Issue: 2
• Pages: 224-226

Dates

published

2013-02

Contributors

author

S. Kasman

• Izmir Vocational School, Department of Technical Programs, Dokuz Eylul University, Izmir, Turkey

author

L. Feray Guleryuz

• Faculty of Engineering, Department of Mechanical Engineering, Ege University, Izmir, Turkey

author

S. Ozan

• Faculty of Engineering, Department of Mechanical Engineering, Ege University, Izmir, Turkey

author

R. Ipek

• Faculty of Engineering, Department of Mechanical Engineering, Ege University, Izmir, Turkey

References

• [1] A. Grabowski, M. Nowak, J. Śleziona, , J. Achievem. Manufact. Eng. 17, 61 (2006)
• [2] J.W. Kaczmar, K. Pietrzak, W. Włosinski, J. Mater. Proc. Technol. 106, 58 (2000)
• [3] S.K. Dewangan, M.Sc. Thesis, National Institute of Technology, 2010
• [4] M.P. Jahan, M. Rahman, Y.S. Wong, Int. J. Mach. Tools Manufact. 51, 837 (2011)
• [5] H.S. Tak, C.S. Ha, H.J. Lee, H.W. Lee, Y.K. Jeong, M.C. Kang, Trans. Nonferrous Met. Soc. China 21, 28 (2011)
• [6] K.M. Patel, P.M. Pandey, P.V. Rao, Int. J. Adv. Manuf. Technol. 47, 1137 (2010)
• [7] S.S. Habib, Appl. Math. Model. 33, 4397 (2009)

Identifiers

DOI

10.12693/APhysPolA.123.224