PL EN


Preferences help
enabled [disable] Abstract
Number of results
2013 | 123 | 2 | 224-226
Article title

Characterization of Machined Surface by EDM for Al/B_4C_{p} Composite Material

Content
Title variants
Languages of publication
EN
Abstracts
EN
In this study, electrical discharge machining process was performed to investigate the machinability of Al/B_4C_p metal matrix composites manufactured by powder metallurgy. For this, an experimental layout was conducted by using full factorial design. In the analysis, there are three parameters of which one is at three levels and the remaining are two levels. Totally, 48 experiments were carried out. The surface roughness (R_{a}) was increased with increasing the current (C), pulse-on-time (T_{on}), pulse-off-time (T_{off}) and amount of particle (PR).
Keywords
EN
Contributors
author
  • Izmir Vocational School, Department of Technical Programs, Dokuz Eylul University, Izmir, Turkey
  • Faculty of Engineering, Department of Mechanical Engineering, Ege University, Izmir, Turkey
author
  • Faculty of Engineering, Department of Mechanical Engineering, Ege University, Izmir, Turkey
author
  • Faculty of Engineering, Department of Mechanical Engineering, Ege University, Izmir, Turkey
References
  • [1] A. Grabowski, M. Nowak, J. Śleziona, , J. Achievem. Manufact. Eng. 17, 61 (2006)
  • [2] J.W. Kaczmar, K. Pietrzak, W. Włosinski, J. Mater. Proc. Technol. 106, 58 (2000)
  • [3] S.K. Dewangan, M.Sc. Thesis, National Institute of Technology, 2010
  • [4] M.P. Jahan, M. Rahman, Y.S. Wong, Int. J. Mach. Tools Manufact. 51, 837 (2011)
  • [5] H.S. Tak, C.S. Ha, H.J. Lee, H.W. Lee, Y.K. Jeong, M.C. Kang, Trans. Nonferrous Met. Soc. China 21, 28 (2011)
  • [6] K.M. Patel, P.M. Pandey, P.V. Rao, Int. J. Adv. Manuf. Technol. 47, 1137 (2010)
  • [7] S.S. Habib, Appl. Math. Model. 33, 4397 (2009)
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv123n2021kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.