PL EN


Preferences help
enabled [disable] Abstract
Number of results
2012 | 122 | 3 | 528-531
Article title

Work Hardening of Magnesium Single Crystals Deformed to Stage~B at Room Temperature

Content
Title variants
Languages of publication
EN
Abstracts
EN
Magnesium single crystals of purity (99.8 wt%) deformed to stage B on the work-hardening curve at the temperature of 293 K and at a strain rate of 10^{-3} s^{-1} were investigated. The modified Bridgman method was used to obtain the crystals of the preferred orientation of (0001)〈11\overline{2}0〉 as primary slip system. By using the method based on the experimental gradient matrix, the activity of slip systems was obtained in magnesium single crystals deformed to shear strain 1.2 γ, where well developed stage B of work hardening was observed. It was shown that primary (0001)〈11\overline{2}0〉 slip system was dominant in the whole investigated range of the examined deformation. The observation and analysis of etch pits on the {\overline{1}2\overline{1}0} plane showed the heterogeneous distribution of dislocations formed during deformation into walls of dislocations perpendicular to the (0001) slip plane. The suggested model of work hardening of magnesium single crystals, which is worth taking into consideration, shows the influence of the long-range stress field derivating from the groups of dislocations arranged in dislocation walls.
Keywords
Contributors
author
  • AGH University of Science and Technology, Department of Metallic Materials and Nano-Engineering Faculty of Non-Ferrous Metals, al. A. Mickiewicza 30, 30-059 Cracow, Poland
  • AGH University of Science and Technology, Department of Metallic Materials and Nano-Engineering Faculty of Non-Ferrous Metals, al. A. Mickiewicza 30, 30-059 Cracow, Poland
References
  • [1] M. Boček, G. Hötzsch, B. Simmen, Phys. Status Solidi 7, 833 (1964)
  • [2] B. Wielke, W. Tikvic, A. Svobodová, P. Lukáč, Acta Metall. 25, 1071 (1977)
  • [3] H. Tonda, S. Ando, Metall. Mater. Trans. A 33, 831 (2002)
  • [4] H. Mughrabi, Acta Metall. 31, 1367 (1983)
  • [5] J. Washburn, E.R. Parker, Trans. AIME 194, 1076 (1952)
  • [6] B. Mikułowski, M. Książek, Key Eng. Mater. 97-98, 395 (1994)
  • [7] G.Y. Chin, R.N. Thurston, E.A. Nesbitt, Trans. AIME 236, 69 (1966)
  • [8] L. Johnson, Trans. AIME 245, 245 (1969)
  • [9] Z.S. Basinski, S.J. Basinski, Philos. Mag. 84, 213 (2004)
  • [10] J.N. Florando, M. Rhee, A. Arsenlis, M.M. Leblanc, D.H. Lassila, Philos. Mag. 86, 795 (2006)
  • [11] M.S. Szczerba, P. Pałka, Arch. Metall. Mater. 54, 57 (2009)
  • [12] M. Sasaki, K. Marukawa, Trans. JIM 18, 540 (1977)
  • [13] J.D. Livingston, Acta Metall. 10, 229 (1962)
  • [14] P.P. Sinha, P.A. Beck, J. Appl. Phys. 32, 1222 (1961)
  • [15] F.F. Lavrentev, Yu.A. Pokhil, Z. Zolotukhina, Mater. Sci. Eng. 32, 113 (1978)
  • [16] V.L. Vladimirova, F.F. Lavrentev, Sov. Phys. Solid State 15, 379 (1973)
  • [17] W. Püschl, G. Schoeck, Crystal Res. Technol. 19, 303 (1984)
  • [18] G. Langford, M. Cohen, Metall. Trans. A 6, 901 (1975)
  • [19] B. Sułkowski, R. Chulist, W. Skrotzki, B. Mikułowski, Cryst. Res. Technol. 46, 439 (2011)
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv122z3p26kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.