PL EN


Preferences help
enabled [disable] Abstract
Number of results
2012 | 122 | 3 | 524-527
Article title

Structure and Properties of Fe-Ni-Al-Si Alloys Produced by Powder Metallurgy

Content
Title variants
Languages of publication
EN
Abstracts
EN
Reactive sintering powder metallurgy is a simple alternative to conventional melting and powder metallurgy processes. During this process, pressed powder mixture of pure metals or other precursors is transformed into bulk intermediary phases by thermally activated in situ reaction. This process was previously tested on Fe-Al and Fe-Al-Si alloys. Positive effect of silicon on the reactive sintering behaviour was determined, leading to the development of novel carbon-free high-silicon FeAl20Si20 alloy (given in wt%). In this work, the effect of nickel on the pressureless reactive sintering of Fe-Al-Si pressed powder mixtures was studied. To explain the nickel influence, differential thermal analysis was utilized. Microstructure, phase composition and porosity of the FeAl20Si20Nix (x = 0, 5, 10, 20 wt%) alloys was described. Hardness, wear resistance, high-temperature oxidation resistance and thermal stability were evaluated as functions of nickel content. Results showed that porosity decreases with growing nickel content down to less than 3 vol.%. Oxidation rate of these alloys is more than 10 times lower than that of original FeAl20Si20 alloy. Thermal stability and abrasive wear resistance of these alloys is also superior to Fe-Al and Fe-Al-Si materials.
Keywords
EN
Contributors
author
  • Department of Metals and Corrosion Engineering, Institute of Chemical Technology Technická 5, 166 28 Prague, Czech Republic
  • Department of Metals and Corrosion Engineering, Institute of Chemical Technology Technická 5, 166 28 Prague, Czech Republic
author
  • Department of Metals and Corrosion Engineering, Institute of Chemical Technology Technická 5, 166 28 Prague, Czech Republic
author
  • Department of Metals and Corrosion Engineering, Institute of Chemical Technology Technická 5, 166 28 Prague, Czech Republic
author
  • Department of Metals and Corrosion Engineering, Institute of Chemical Technology Technická 5, 166 28 Prague, Czech Republic
  • Department of Metals and Corrosion Engineering, Institute of Chemical Technology Technická 5, 166 28 Prague, Czech Republic
References
  • [1] P. Kratochvíl, Intermetallics 16, 587 (2008)
  • [2] http://www.reade.com/Products/Aluminides/iron_aluminide.html
  • [3] P. Haušild, J. Siegl, P. Málek, V. Šíma, Intermetallics 17, 680 (2009)
  • [4] R.R. Judkins, U.S. Rao, Intermetallics 8, 1347 (2000)
  • [5] P.A. Mcquay, V.K. Sikka, in: Encyclopedia of Materials: Science and Technology, Pergamon Press, London 2001, p. 1011
  • [6] S. Jozwiak, K. Karczewski, Z. Bojar, Intermetallics 18, 1332 (2010)
  • [7] U.S. Patent No. 5,269,830
  • [8] P. Novák, V. Knotek, J. Šerák, A. Michalcová, D. Vojtěch, Powder Metall. 54, 167 (2011)
  • [9] P. Novák, V. Knotek, M. Voděrová, J. Kubásek, J. Šerák, A. Michalcová, D. Vojtěch, J. Alloys Comp. 497, 90 (2010)
  • [10] P. Novák, A. Michalcová, M. Voděrová, M. Šíma, J. Šerák, D. Vojtěch, K. Wienerová, J. Alloys Comp. 493, 81 (2010)
  • [11] P. Novák, D. Vojtěch, J. Šerák, Surf. Coat. Technol. 200, 5229 (2006)
  • [12] P. Novák, M. Zelinková, J. Šerák, A. Michalcová, M. Novák, D. Vojtěch, Intermetallics 19, 1306 (2011)
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv122z3p25kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.