High Temperature Oxidation of Spark Plasma Sintered and Thermally Sprayed FeAl-Based Iron Aluminides

• Authors: P. Haušild , M. Karlík , T. Skiba , P. Sajdl , J. Dubský , M. Palm
• Languages of publication: EN

Abstracts

EN

The presented work deals with the oxidation resistance of spark plasma sintered and thermally sprayed FeAl-based intermetallics. Gas-atomized binary single phase Fe-43(at.%)Al and dual phase Fe-55(at.%)Al powders were used for spark plasma sintering and/or thermal spraying. Coatings were deposited by two different plasma spray technologies - gas and water stabilized plasma guns. The prepared samples were exposed to oxidation in artificial air at 700°C. The mass gain was measured during oxidation at 700C up to 1000 h. Microstructures, phase and chemical compositions of the formed scales were characterized after the exposition by means of scanning electron microscopy, X-ray diffraction and electron spectroscopy for chemical analysis (X-ray photoelectron spectroscopy).

Keywords

EN

81.05.Bx; 81.65.Mq; 81.20.Ev; 81.15.Rs

Discipline

• 81.20.Ev: Powder processing: powder metallurgy, compaction, sintering, mechanical alloying, and granulation
• 81.65.Mq: Oxidation(see also 64.75.Lm Phase separation and segregation in oxidation)
• 81.05.Bx: Metals, semimetals, and alloys
• 81.15.Rs: Spray coating techniques

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2012
• Volume: 122
• Issue: 3
• Pages: 465-468

Dates

published

2012-09

Contributors

author

P. Haušild

• Czech Technical University in Prague, Faculty of Nuclear Sciences and Physical Engineering Department of Materials, Trojanova 13, 120 00 Prague 2, Czech Republic

author

M. Karlík

• Czech Technical University in Prague, Faculty of Nuclear Sciences and Physical Engineering Department of Materials, Trojanova 13, 120 00 Prague 2, Czech Republic

author

T. Skiba

• Research Centre Rez Ltd., Husinec-Rez 130, 250 68 Rez, Czech Republic

author

P. Sajdl

• Institute of Chemical Technology Prague, Technická 5, 166 28 Prague 6, Czech Republic

author

J. Dubský

• Institute of Plasma Physics AS CR, v. v. i., Department of Materials Engineering, Za Slovankou 3, 182 00 Prague 8, Czech Republic

author

M. Palm

• Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-Str. 1, D-40237 Düsseldorf, Germany

References

• [1] W.C. Hagel, Corrosion 21, 316 (1965)
• [2] B. Schmidt, P. Nagpal, I. Baker, in: High-Temperature Ordered Intermetallic Alloys III, MRS Symp. Proc., Vol. 133, Eds. C.T. Liu, A.I. Taub, N.S. Stoloff, C.C. Koch, Materials Research Society, PA 1989, p. 755
• [3] J.R. Stephens, in: High-Temperature Intermetallic Ordered Alloys, MRS Symp. Proc., Vol. 39, Eds. C.C. Koch, C.T. Liu, N.S. Stoloff, Materials Research Society, PA 1985, p. 381
• [4] P.F. Tortorelli, K. Natesan, Mater. Sci. Eng. A 258, 115 (1998)
• [5] R. Prescott, M.J. Graham, Oxid. Met. 38, 73 (1992)
• [6] I. Rommerskirchen, B. Eltester, H.-J. Grabke, Mater. Corros. 47, 646 (1996)
• [7] M. Sakiyama, P. Tomaszewicz, G.R. Wallwork, Oxid. Met. 13, 311 (1979)
• [8] J.H. Schneibel, in: Processing, Properties, and Applications of Iron Aluminides, Eds. J.H. Schneibel, M.A. Crimp, TMS, Warrendale, PA, 1994, p. 329
• [9] I. Baker, P.R. Munroe, Int. Mater. Rev. 42, 181 (1997)
• [10] P. Haušild, J. Siegl, P. Málek, V. Šíma, Intermetallics 17, 680 (2009)
• [11] N.S. Stoloff, Mater. Sci. Eng. A 258, 1 (1998)
• [12] D.G. Morris, S. Gunter, Mater. Sci. Eng. A 208, 7 (1996)
• [13] Y. Minamino, Y. Koizumi, N. Tsuji, N. Hirohata, K. Mizuuchi, Y. Ohkanda, Sci. Technol. Adv. Mater. 5, 133 (2004)
• [14] S. Paris, E. Gaffet, F. Bernard, Z.A. Munir, Scr. Mater. 50, 691 (2004)
• [15] G. Ji, T. Grosdidier, N. Bozzolo, S. Launois, Intermetallics 15, 108 (2007)
• [16] L. D'Angelo, L. D'Onofrio, G. Gonzalez, J. Alloys Comp. 483, 154 (2009)
• [17] T. Grosdidier, G. Ji, F. Bernard, E. Gaffet, Z.A. Munir, S. Launois, Intermetallics 14, 1208 (2006)
• [18] J.M. Guilemany, C.R.C Lima, N. Cinca, J.R. Miguel, Surf. Coat. Technol. 201, 2072 (2006)
• [19] J.M. Guilemany, N. Cinca, S. Dosta, C.R.C Lima, Intermetallics 15, 1384 (2007)
• [20] T. Grosdidier, H.L. Liao, A. Tidu, in: Thermal Spray: Surface Engineering via Applied Research, Ed. C.C. Berndt, ASM International, Materials Park, OH 2000, p. 1341
• [21] C. Xiao, W. Chen, Surf. Coat. Technol. 201, 3625 (2006)
• [22] N. Masahashi, S. Watanabe, S. Hanada, ISIJ Int. 41, 1010 (2001)
• [23] J. Xiang, X. Zhu, G. Chen, Z. Duan, Y. Lin, Y. Liu, Trans. Nonferrous Met. Soc. China 19, 1545 (2009)
• [24] T. Skiba, P. Haušild, M. Karlík, K. Vanmeensel, J. Vleugels, Intermetallics 18, 1410 (2010)
• [25] R. Mušálek, O. Kovářík, T. Skiba, P. Haušild, M. Karlík, J. Colmenares-Angulo, Intermetallics 18, 1415 (2010)
• [26] M. Palm, G. Sauthoff, Intermetallics 12, 1345 (2004)
• [27] P. Novák, M. Zelinková, J. Šerák, A. Michalcová, M. Novák, D. Vojtěch, Intermetallics 19, 1306 (2011)
• [28] A. Hotař, M. Palm, Intermetallics 18, 1390 (2010)

Identifiers

DOI

10.12693/APhysPolA.122.465