PL EN


Preferences help
enabled [disable] Abstract
Number of results
2012 | 122 | 3 | 465-468
Article title

High Temperature Oxidation of Spark Plasma Sintered and Thermally Sprayed FeAl-Based Iron Aluminides

Content
Title variants
Languages of publication
EN
Abstracts
EN
The presented work deals with the oxidation resistance of spark plasma sintered and thermally sprayed FeAl-based intermetallics. Gas-atomized binary single phase Fe-43(at.%)Al and dual phase Fe-55(at.%)Al powders were used for spark plasma sintering and/or thermal spraying. Coatings were deposited by two different plasma spray technologies - gas and water stabilized plasma guns. The prepared samples were exposed to oxidation in artificial air at 700°C. The mass gain was measured during oxidation at 700C up to 1000 h. Microstructures, phase and chemical compositions of the formed scales were characterized after the exposition by means of scanning electron microscopy, X-ray diffraction and electron spectroscopy for chemical analysis (X-ray photoelectron spectroscopy).
Keywords
Year
Volume
122
Issue
3
Pages
465-468
Physical description
Dates
published
2012-09
References
  • [1] W.C. Hagel, Corrosion 21, 316 (1965)
  • [2] B. Schmidt, P. Nagpal, I. Baker, in: High-Temperature Ordered Intermetallic Alloys III, MRS Symp. Proc., Vol. 133, Eds. C.T. Liu, A.I. Taub, N.S. Stoloff, C.C. Koch, Materials Research Society, PA 1989, p. 755
  • [3] J.R. Stephens, in: High-Temperature Intermetallic Ordered Alloys, MRS Symp. Proc., Vol. 39, Eds. C.C. Koch, C.T. Liu, N.S. Stoloff, Materials Research Society, PA 1985, p. 381
  • [4] P.F. Tortorelli, K. Natesan, Mater. Sci. Eng. A 258, 115 (1998)
  • [5] R. Prescott, M.J. Graham, Oxid. Met. 38, 73 (1992)
  • [6] I. Rommerskirchen, B. Eltester, H.-J. Grabke, Mater. Corros. 47, 646 (1996)
  • [7] M. Sakiyama, P. Tomaszewicz, G.R. Wallwork, Oxid. Met. 13, 311 (1979)
  • [8] J.H. Schneibel, in: Processing, Properties, and Applications of Iron Aluminides, Eds. J.H. Schneibel, M.A. Crimp, TMS, Warrendale, PA, 1994, p. 329
  • [9] I. Baker, P.R. Munroe, Int. Mater. Rev. 42, 181 (1997)
  • [10] P. Haušild, J. Siegl, P. Málek, V. Šíma, Intermetallics 17, 680 (2009)
  • [11] N.S. Stoloff, Mater. Sci. Eng. A 258, 1 (1998)
  • [12] D.G. Morris, S. Gunter, Mater. Sci. Eng. A 208, 7 (1996)
  • [13] Y. Minamino, Y. Koizumi, N. Tsuji, N. Hirohata, K. Mizuuchi, Y. Ohkanda, Sci. Technol. Adv. Mater. 5, 133 (2004)
  • [14] S. Paris, E. Gaffet, F. Bernard, Z.A. Munir, Scr. Mater. 50, 691 (2004)
  • [15] G. Ji, T. Grosdidier, N. Bozzolo, S. Launois, Intermetallics 15, 108 (2007)
  • [16] L. D'Angelo, L. D'Onofrio, G. Gonzalez, J. Alloys Comp. 483, 154 (2009)
  • [17] T. Grosdidier, G. Ji, F. Bernard, E. Gaffet, Z.A. Munir, S. Launois, Intermetallics 14, 1208 (2006)
  • [18] J.M. Guilemany, C.R.C Lima, N. Cinca, J.R. Miguel, Surf. Coat. Technol. 201, 2072 (2006)
  • [19] J.M. Guilemany, N. Cinca, S. Dosta, C.R.C Lima, Intermetallics 15, 1384 (2007)
  • [20] T. Grosdidier, H.L. Liao, A. Tidu, in: Thermal Spray: Surface Engineering via Applied Research, Ed. C.C. Berndt, ASM International, Materials Park, OH 2000, p. 1341
  • [21] C. Xiao, W. Chen, Surf. Coat. Technol. 201, 3625 (2006)
  • [22] N. Masahashi, S. Watanabe, S. Hanada, ISIJ Int. 41, 1010 (2001)
  • [23] J. Xiang, X. Zhu, G. Chen, Z. Duan, Y. Lin, Y. Liu, Trans. Nonferrous Met. Soc. China 19, 1545 (2009)
  • [24] T. Skiba, P. Haušild, M. Karlík, K. Vanmeensel, J. Vleugels, Intermetallics 18, 1410 (2010)
  • [25] R. Mušálek, O. Kovářík, T. Skiba, P. Haušild, M. Karlík, J. Colmenares-Angulo, Intermetallics 18, 1415 (2010)
  • [26] M. Palm, G. Sauthoff, Intermetallics 12, 1345 (2004)
  • [27] P. Novák, M. Zelinková, J. Šerák, A. Michalcová, M. Novák, D. Vojtěch, Intermetallics 19, 1306 (2011)
  • [28] A. Hotař, M. Palm, Intermetallics 18, 1390 (2010)
Document Type
Publication order reference
YADDA identifier
bwmeta1.element.bwnjournal-article-appv122z3p10kz
Identifiers
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.