PL EN


Preferences help
enabled [disable] Abstract
Number of results
2012 | 122 | 3 | 439-443
Article title

Microstructure, Thermal and Mechanical Properties of Non-Isothermally Annealed Al-Sc-Zr and Al-Mn-Sc-Zr Alloys Prepared by Powder Metallurgy

Content
Title variants
Languages of publication
EN
Abstracts
EN
This paper reports results of a study aimed at understanding the precipitation processes occurring during the annealing of two Al-Sc-Zr-based alloys with and without Mn prepared by powder metallurgy with subsequent hot extrusion at 350°C. Samples were isochronally annealed up to ≈ 570°C. Precipitation behaviour was studied by electrical resistometry and differential scanning calorimetry. Mechanical properties were monitored by microhardness HV1 measurements. Transmission electron microscopy examinations and X-ray diffraction of specimens quenched from temperatures of significant resistivity changes helped to identify the microstructural processes responsible for these changes. Fine (sub)grain structure develops and fine coherent Al_3Sc and/or Al_3(Sc,Zr) particles precipitate during extrusion in both alloys. The distinct changes in resistivity (at temperatures above ≈ 330°C) of the Al-Mn-Sc-Zr alloy are mainly caused by precipitation of Mn-containing particles. The easier diffusion of Mn atoms along the (sub)grain boundaries is responsible for the precipitation of the Al_6Mn and/or Al_6(Mn,Fe) particles at relatively lower temperatures compared to the temperature range of precipitation of these particles in the classical mould-cast Al-Mn-Sc-Zr alloys The apparent activation energy for precipitation of the Al_3Sc and Al_6Mn particles in the Al-Mn-Sc-Zr alloy was determined as (106 ± 10) kJ mol^{-1} and (152 ± 33) kJ mol^{-1}, respectively.
Keywords
EN
Year
Volume
122
Issue
3
Pages
439-443
Physical description
Dates
published
2012-09
References
  • [1] L.S. Toropova, D.G. Eskin, M.L. Kharakterova, T.V. Dobatkina, Advanced Aluminium Alloys Containing Scandium - Structure and Properties, Gordon and Breach, The Netherlands 1998
  • [2] V. Ocenasek, M. Slamova, Mater. Charact. 47, 157 (2001), DOI: 10.1016/S1044-5803(01) 00165-6
  • [3] B. Smola, I. Stulíková, V. Očenášek, J. Pelcová, V. Neubert, Mater. Sci. Eng. A 462, 370 (2007), DOI: 10.1016/j.msea. 2005.11.075
  • [4] J. Røyset, R. Ryum, Int. Mater. Rev. 50, 19 (2005), DOI: 10.1179/174328005X14311
  • [5] K.E. Knipling, R.A. Karnesky, C.P. Lee, D.C. Dunand, D.N. Seidman, Acta Mater. 58, 5184 (2010), DOI: 10.1016/j.actamat. 2010.05.054
  • [6] B. Forbord, H. Hallem, J. Røyset, K. Marthinsen, Mater. Sci. Eng. A 475, 241 (2008), DOI: 10.1016/j.msea.2007.04.054
  • [7] M. Kolář, V. Očenášek, J. Uhlíř, I. Stulíková, B. Smola, M. Vlach, V. Neubert, K. Šperlink, Mater. Sci. Forum 567-568, 357 (2008), DOI: 10.4028/www.scientific.net/MSF.567-568.357
  • [8] M. Vlach, B. Smola, I. Stulíková, V. Očenášek, Int. J. Mater. Res. 100, 420 (2009), DOI: 10.3139/146.110022
  • [9] M. Vlach, I. Stulíková, B. Smola, N. Žaludová, J. Černá, J. Alloys Comp. 492, 143 (2010), DOI: 10.1016/j.jallcom. 2009.11.126
  • [10] W. Lefebvre, F. Danoix, H. Hallem, B. Forbord, A. Bostel, K. Marthinsen, J. Alloys Comp. 470, (2009), DOI: 10.1016/j.jallcom. 2008.02.043
  • [11] X. Xia, Scr. Met. 28, 1213 (1993), DOI: 10.1016/0956-716X(93) 90456-3
  • [12] Y. Birol, Scr. Mater. 60, 5 (2009), DOI: 10.1016/j.scriptamat. 2008.07.047
  • [13] B. Forbord, L. Auran, W. Lefebvre, H. Hallem, K. Marthinsen, Mater. Sci. Eng A 424, 174 (2006), DOI: 10.1016/j.msea. 2006.03.044
  • [14] M. Cieslar, M. Slámová, J. Uhlíř, C. Coupeau, J. Bonneville, Kovove Mater. 45, 91 (2007)
  • [15] M. Vlach, I. Stulíková, B. Smola, N. Žaludová, Mater. Charact. 61, 1400 (2010), DOI: 10.1016/j.matchar. 2010.10.006
  • [16] M. Vlach, I. Stulíková, B. Smola, H. Císařová, J. Piešová, S. Daniš, R. Gemma, J. Málek, D. Tanprayoon, V. Neubert, Int. J. Mater. Res. 103, 814 (2012), DOI: 10.3139/146.110712
  • [17] R. Ünal, K.U. Kainer, Powder Metall. 41, 119 (1998)
  • [18] V. Neubert, B. Smola, I. Stulíková, A. Bakkar, J. Reuter, Mater. Sci. Eng. A 464, 358 (2007), DOI: 10.1016/j.msea. 2007.03.070
  • [19] H. Fujii, M. Sugamata, J. Kaneko, M. Kubota, Mater. Sci. Forum 396-402, 245 (2002), DOI: 10.4028/ www.scientific.net/MSF.396-402.245
  • [20] C.B. Fuller, J.L. Murray, D.N. Seidman, Acta Mater. 53, 5401 (2005), DOI: 10.1016/j.actamat. 2005.08.016
  • [21] K.E. Knipling, D.C. Dunand, D.N. Seidman, Int. J. Mater. Res. 97, 246 (2006)
  • [22] Y. Birol, J. Alloys Comp. 471, 122 (2009), DOI: 10.1016/j.jallcom. 2008.04.005
  • [23] Y. Kang, A.D. Pelton, P. Chartrand, C.D. Fuerst, Calphad 32, 413 (2008), DOI: 10.1016/j.calphad. 2008.03.002
  • [24] G.M. Novotny, A.J. Ardell, Mater. Sci. Eng A 318, 144 (2001), DOI: 10.1016/S0921-5093(01)01326-0
  • [25] S.I. Fujikawa, M. Sugaya, H. Takei, K.I. Hirano, J. Less-Common Met. 63, 87 (1979), DOI: 10.1016/0022-5088(79) 90211-X
  • [26] P. Olafsson, R. Sandstrom, A.J. Karlsson, J. Mater. Sci. 32, 4383 (1997), DOI: 10.1023/A:1018680024876
  • [27] V. Očenášek, P. Homola, M. Kolář, J. Uhlíř, M. Cieslar, in: Metal 2009, 18th Int. Conf. Metallurgy and Materials, Hradec nad Moravici, Tanger, Ostrava 2009, p. 413
  • [28] M.J. Starink, Thermochim. Acta 404, 163 (2003), DOI: 10.1016/S0040-6031(03) 00144-8
  • [29] H. Jo, S.I. Fujikawa, Mater. Sci. Eng. A 171, 151 (1993), DOI: 10.1016/0921-5093(93) 90401-Y
  • [30] K. Fan, F. Liu, K. Zhang, G.C. Yang, Y.H. Zhou, J. Cryst. Growth 311, 4660 (2009), DOI: 10.1016/j.jcrysgro. 2009.09.003
  • [31] M.M. Karnowsky, M. Moss, C. Stein, Scr. Metall. 8, 513 (1974), DOI: 10.1016/0036-9748(74) 90061-1
  • [32] N.J. Luiggi, Metall. Mater. Trans. A 28, 149 (1997), DOI: 10.1007/s11663-997-0137-9
Document Type
Publication order reference
YADDA identifier
bwmeta1.element.bwnjournal-article-appv122z3p04kz
Identifiers
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.