PL EN


Preferences help
enabled [disable] Abstract
Number of results
2012 | 121 | 5-6 | 1282-1284
Article title

The Investigation of the Magnetization Reversal Mechanism in the Nd-Fe-B Type Magnet, Aligned by Hot Deformation

Content
Title variants
Languages of publication
EN
Abstracts
EN
The magnetization reversal mechanism in the Nd_{16}Fe_{78}B_6 hot densified magnet, aligned by means of die-upset forging has been investigated. The magnetic parameters have been derived from major hysteresis loop. The magnetocrystalline anisotropy constants K_1 and K_2 using Sucksmith-Thompson relation modified by Ram and Gaunt have been calculated from the high field measurements up to 5 T. These data have been used to determine the theoretical value of coercivity as a function of the angle Ψ_0 between the sample easy axis and the applied magnetic field direction. The experimental value of coercivity as a function of Ψ_0 has been determined from the demagnetization curves measured for different Ψ_0 angles. It was found that the best correlation between theoretical and experimental data have been achieved for magnetization reversal mechanism controlled partially by pinning of domain walls on grain boundaries and nucleation processes.
Keywords
Contributors
author
  • Institute of Physics, Częstochowa University of Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland
author
  • Institute of Physics, Częstochowa University of Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland
author
  • Institute of Materials Science, Częstochowa University of Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland
author
  • Electrotechnical Institute, M. Skłodowskiej-Curie 55/61, 50-369 Wrocław, Poland
  • International Laboratory of High Magnetic Fields and Low Temperatures, Gajowicka 95, 53-421 Wrocław, Poland
author
  • Institute of Physics, Częstochowa University of Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland
  • Institute of Physics, Częstochowa University of Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland
References
  • 1. W. Lipiec, H.A. Davies, J. Alloys Comp. 491, 694 (2010)
  • 2. Y.B. Kim, H.T. Kim, S.H. Cho, G.A. Kapustin, Mater. Sci. 21, 141 (2003)
  • 3. R.W. Lee, Appl. Phys. Lett. 46, 790 (1985)
  • 4. C.D. Fuerst, E.G. Brewer, J. Appl. Phys. 73, 5751 (1993)
  • 5. C.D. Fuerst, E.G. Brewer, J. Appl. Phys. 70, 6444 (1991)
  • 6. D. Derewnicka-Krawczynska, Ph.D. thesis, Warsaw 2006 (in Polish)
  • 7. D. Plusa, M. Dospial, D. Derewnicka-Krawczyńska, P. Wieczorek, U. Kolarczyk, Arch. Met. Mater. 56, 159 (2011)
  • 8. V.I. Nizhankovskii, L.B. Lugansky, Meas. Sci. Technol. 18, 1533 (2007)
  • 9. W. Sucksmith, J.E. Thompson, Proc. R. Soc. Lond. Ser. A 225, 362 (1954)
  • 10. U. Ram, P. Grunt, J. Appl. Phys. 54, 2872 (1983)
  • 11. K.-D. Durst, H. Kronmüller, W. Ervens, Phys. Status Solidi A 108, 403 (1988)
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv121n5-6p90kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.