Some Applications of the Image Analysis in the Metal Material Science

• Authors: Z. Odanović , M. Đurđević , J. Krstić Pavlović , M. Arsić , B. Katavić
• Languages of publication: EN

Abstracts

EN

In different areas of science such as medicine, biology and engineering the image analysis is widely used. Quantitative measuring by the image analysis has also found application in metal materials science, especially in metallographic microstructure analysis. The measuring of the linear and area dimensions of the microconstituents in the metal material structure performed by the image analysis is presented in the paper. The effects of the heat treatment temperature on the brittle phase content in the structure of the heat resistant Ni-Cr-Co-W alloy were analysed. Investigation of the influence of the alloying elements content in the Al alloys for automotive application, on dendrite arm spacing in the cast structure are also presented. Obtained results of the quantitative measured dimensions have shown direct impact of the process parameters on the analysed metals microstructure characteristics. All tests were performed by the light optical microscope with automatic image analyser. Presented experimental results are based on a large number of measurements. A statistical analysis was performed and a high correlation of the results was obtained. For each of the presented investigations and analyzed phenomenon, a statistical mathematical model is suggested with the boundary conditions defined by the investigated intervals of variables.

Keywords

EN

81.05.Bx; 81.30.Fb; 81.40.Cd

Discipline

• 81.30.Fb: Solidification
• 81.40.Cd: Solid solution hardening, precipitation hardening, and dispersion hardening; aging(see also 64.75.Nx Phase separation and segregation in solid solutions)
• 81.05.Bx: Metals, semimetals, and alloys

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2012
• Volume: 121
• Issue: 1
• Pages: 111-113

Dates

published

2012-01

Contributors

author

Z. Odanović

• IMS Institute, Bulevar vojvode Mišića 43, 11000 Belgrade, Serbia

author

M. Đurđević

• Nemak Linz, Zeppelinstr. 24, 4030 Linz, Austria

author

J. Krstić Pavlović

• Otto-von-Guericke, Universität Magdeburg, IFQ, Universitätspl. 2, 39104 Magdeburg, Germany

author

M. Arsić

• IMS Institute, Bulevar vojvode Mišića 43, 11000 Belgrade, Serbia

author

B. Katavić

• Institute Goša, Milana Rakića 35, 11000 Belgrade, Serbia

References

• 1. A.S.M. Standard, SS-228 SUPERTHERM, www.techstreet.com/standards/ASM/SS_228
• 2. Z. Odanovic, M.B. Đurđevic, G. Byczynski, B. Katavic, WIT Trans. Eng. Sci. 64, 259 (2009)
• 3. J. Pavlović-Krstić, Z. Odanović, V. Grabulov, G. Krstić, R. Bähr, Foundry-Livarstvo 49, 3 (2010)

Identifiers

DOI

10.12693/APhysPolA.121.111