Extension of the Jiles-Atherton Model for Modelling the Frequency Dependence of Magnetic Characteristics of Amorphous Alloy Cores for Inductive Components of Electronic Devices

• Authors: R. Szewczyk , P. Frydrych
• Languages of publication: EN

Abstracts

EN

The paper presents the results of modelling the influence of magnetizing field frequency on the magnetic characteristics of Fe_{40}Ni_{38}Mo_4B_{18} amorphous alloy in as-quenched state. An extension for the Jiles-Atherton model was applied and changes of the parameter k during the magnetization process were considered. On the base of the experiment, the parameters of the Jiles-Atherton model were calculated for experimental hysteresis loop. Evolutionary strategies, together with the gradient optimisation method, were used. Moreover, the changes of parameters c and a as the function of frequency of magnetizing field were also taken into consideration. Finally, the high conformity between the experimental and modelling results was achieved. This high conformity indicates that the results both create new possibilities in modelling of properties of inductive components based on the amorphous alloys, as well as extend the possibility of quantitative description of magnetization process.

Keywords

EN

75.50.Kj; 75.60.Ej; 75.78.-n

Discipline

• 75.60.Ej: Magnetization curves, hysteresis, Barkhausen and related effects(for hysteresis in ferroelectricity, see 77.80.Dj)
• 75.50.Kj: Amorphous and quasicrystalline magnetic materials
• 75.78.-n: Magnetization dynamics

• Journal: Acta Physica Polonica A
• Year: 2010
• Volume: 118
• Issue: 5
• Pages: 782-784

Dates

published

2010-11

Contributors

author

R. Szewczyk

• Industrial Research Institute for Automation and Measurements, Al. Jerozolimskie 202, 02-486 Warszawa, Poland

author

P. Frydrych

• Industrial Research Institute for Automation and Measurements, Al. Jerozolimskie 202, 02-486 Warszawa, Poland

References

• 1. F. Liorzou, B. Phelps, D.L. Atherton, IEEE Trans. Magn. 36, 418 (2000)
• 2. P. Ripka, Sensors Actuators A 33, 129 (1992)
• 3. A. Bieńkowski, R. Szewczyk, Sensors and Actuators A 113, 270 (2004)
• 4. A. Pressman, Switching Mode Power Supply Design, McGraw-Hill, New York 1998
• 5. P. Andrei, O. Caltun, A. Stancu, IEEE Trans. Magn. 34, 231 (1998)
• 6. D.C. Jiles, D. Atherton, J. Magn. Magn. Mater. 61, 48 (1986)
• 7. M.J. Sablik, D.C. Jiles, IEEE Trans. Magn. 35, 498 (1999)
• 8. D.C. Jiles, IEEE Trans. Magn. 30, 4326 (1994)
• 9. A. Ramesh, D.C. Jiles, J. Roderik, IEEE Trans. Magn. 32, 4234 (1996)
• 10. K. Chwastek, J. Szczyglowski, Math. Comp. Simulation 71, 206 (2006)
• 11. P. Kis, A. Ivanyi, Physica B 343, 59 (2004)
• 12. D.C. Jiles, D.L. Atherton, J. Appl. Phys. 55, 2115 (1984)
• 13. J.A. Jatau, E. Della Torre, IEEE Trans. Magn. 30, 4927 (1994)
• 14. R. Szewczyk, J. Phys. D 40, 4109 (2007)
• 15. H.P. Schwefel, Evolution and Optimum Seeking, Wiley, New York 1995
• 16. H.P. Schwefel, Numerical Optimalization of Numerical Models, Wiley, New York 1981

Identifiers

DOI

10.12693/APhysPolA.118.782