New Method of Measurement of the Magnetoelastic Characteristics for Tensile Stresses

• Authors: J. Salach , R. Szewczyk , A. Bieńkowski , A. Kolano-Burian , M. Falkowski
• Languages of publication: EN

Abstracts

EN

The paper presents a novel method of measurements of tensile stress dependence of the magnetic characteristics of ring-shaped cores made of soft amorphous alloys. In the presented method, the uniform tensile stress was applied perpendicularly to the magnetizing field direction. Magnetoelastic core with closed magnetic circuit was fixed on the non-magnetic backings enabling the conversion of compressive force into tensile stresses as well as it enables the core to be winded by magnetizing and sensing windings. Magnetoelastic characteristics measured under tensile stress, for Fe_{25}Ni_{55}Si_{10}B_{10} alloy annealed in temperature 350°C for 1 h, are presented in this paper. The presented results indicate high tensile stress sensitivity of Fe_{25}Ni_{55}Si_{10}B_{10} alloy. Moreover, together with magnetoelastic characteristics for compressive stresses (presented previously in the literature), the describes results create possibility of further development of models of the magnetoelastic effects in amorphous alloys.

Keywords

EN

75.80.+q; 75.50.Kj

Discipline

• 75.50.Kj: Amorphous and quasicrystalline magnetic materials
• 75.80.+q: Magnetomechanical effects, magnetostriction(for magnetostrictive devices, see 85.70.Ec)

• Journal: Acta Physica Polonica A
• Year: 2010
• Volume: 118
• Issue: 5
• Pages: 775-777

Dates

published

2010-11

Contributors

author

J. Salach

• Institute of Metrology and Biomedical Engineering, Warsaw University of Technology, św. A. Boboli 8, 02-525 Warszawa, Poland

author

R. Szewczyk

• Institute of Metrology and Biomedical Engineering, Warsaw University of Technology, św. A. Boboli 8, 02-525 Warszawa, Poland

author

A. Bieńkowski

• Institute of Metrology and Biomedical Engineering, Warsaw University of Technology, św. A. Boboli 8, 02-525 Warszawa, Poland

author

A. Kolano-Burian

• Institute of Non-ferrous Metals, Sowińskiego 5, 44-100 Gliwice, Poland

author

M. Falkowski

• Institute of Metrology and Biomedical Engineering, Warsaw University of Technology, św. A. Boboli 8, 02-525 Warszawa, Poland

References

• 1. E. Tremolet, Magnetostriction, C.R.C. Press, London 1992
• 2. D.C. Jiles, Introduction to Magnetism and Magnetic Materials, Chapman and Hall, London 1998
• 3. J. Salach, A. Bienkowski, R. Szewczyk, J. Automat. Mobile Robot. Intel. Systems 1, 66 (2007)
• 4. A. Pressman, Switching Mode Power Supply Design, McGraw-Hill, New York 1998
• 5. R. Szewczyk, Pramana - J. Phys. 67, 1165 (2006)
• 6. A. Bieńkowski, R. Szewczyk, Sensors Actuat. A 113, 270 (2004)
• 7. F. Liorzou, B. Phelps, D.L. Atherton, IEEE Trans. Magn. 36, 418 (2000)
• 8. R. Szewczyk, A. Bieńkowski, R. Kolano, Cryst. Res. Technol. 38, 320 (2003)

Identifiers

DOI

10.12693/APhysPolA.118.775