Surface Modifications of a Ti6Al4V Alloy by a Laser Shock Processing

• Authors: M. Rozmus-Górnikowska
• Languages of publication: EN

Abstracts

EN

The influence of the Laser Shock Processing (LSP) on the morphology, microstructure and surface layer properties of a Ti6Al4V alloy has been studied. Residual stresses were assessed as well. For the Laser Shock Processing a 1 KW, high-power Q-switched Nd:YAG laser was used. During the process the surface of the investigated material was covered by series of single, partially overlapping impulses. The laser power density was a 1 GW/cm^{2} and a pulse duration of 18 ns. The microstructure and the phases presented in the surface layer of the treated material were analysed by optical, scanning and transmisssion electron microscopy as well as by X-ray diffractometry. The X-ray diffractometry was also use to determine the residual stresses. It has been found that the laser shock processing can cause plastic deformation and generate the compressive residual stresses into the treated surface of a Ti6Al4V alloy.

Keywords

EN

68.37.-d; 68.35.bd; 68.35.Gy; 68.35.Ct

Discipline

• 68.35.Ct: Interface structure and roughness
• 68.35.bd: Metals and alloys
• 68.35.Gy: Mechanical properties; surface strains(for strain induced piezoelectric fields, see 77.65.Ly; for strain effects on ferroelectric phase transitions, see 77.80.bn)
• 68.37.-d: Microscopy of surfaces, interfaces, and thin films

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2010
• Volume: 117
• Issue: 5
• Pages: 808-811

Dates

published

2010-05

Contributors

author

M. Rozmus-Górnikowska

• Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, 30 Mickiewicza Ave., 30-059 Cracow, Poland

References

• 1. N. Tsuji, S. Tanaka, T. Takasugi, Surf. Coat. Technol. 203, 1400 (2009)
• 2. Y.S. Tian, Cz. Chen, S.T. Li, Q.H. Huo, Appl. Surf. Sci. 242, 177 (2005)
• 3. A. Gaggl, G. Schultes, W.D. Muller, H. Kacher, Biomaterials 21, 1067 (2000)
• 4. P. Peyre, C. Carboni, P. Forget, G. Beranger, C. Lemaitre, D. Stuart, J. Mater. Sci. 42, 6866 (2007)
• 5. M. Morales, J.L. Ocana, C. Molpeceres, J.A. Porro, A. Garcia-Beltran, Surf. Coat. Technol. 202, 2257 (2008)
• 6. J.M. Yang, Y. C Her, N. Han, A. Clauer, Materials Science and Engineering A 298, 296 (2001)
• 7. A. Kruusing, Opt. Lasers Eng. 41, 307 (2004)
• 8. G. Gomez-Rosas, C. Rubio-Gonzalez, J.L. Ocana, C. Molpeceres, J.A. Porro, W. Chi-Moreno, M. Morale, Appl. Surf. Sci. 252, 883 (2005)
• 9. H.B. Sencer, S.A. Maloy, G.T. Gray III, Acta Materialia 53, 3293 (2005)
• 10. S. Wroński, K. Wierzbanowski, A. Baczmański, CH. Braham, A. Lodini, Archives of Metallurgy and Materiale 53, 276 (2008)

Identifiers

DOI

10.12693/APhysPolA.117.808