Mechanical Properties of Boronized AISI 316, AISI 1040, AISI 1045 and AISI 4140 Steels

• Authors: A. Calik , O. Sahin , N. Ucar
• Languages of publication: EN

Abstracts

EN

In this study, some mechanical properties of borided and unborided four steels were investigated. Boronizing of steels was performed by powder pack method at 1210 K for 4 h. The hardness of borides, boride layer thickness and room temperature tensile properties were measured and it was observed that hardness and tensile properties strongly depend on chemical composition of steels. In addition, the effect of a notch on impact behavior was examined by conducting the Charpy tests on borided and unborided steels. The greatest notch toughness was found for a steel AISI 316 with a microstructure consisting of different C, Ni and Cr chemical composition compared to AISI 1040, 1045 and 4140 steels.

Keywords

EN

62.20.-x; 62.20.Qp; 68.35.Fx

Discipline

• 62.20.-x: Mechanical properties of solids
• 62.20.Qp: Friction, tribology, and hardness(see also 46.55.+d Tribology and mechanical contacts in continuum mechanics of solids; for materials treatment effects on friction related properties, see 81.40.Pq)
• 68.35.Fx: Diffusion; interface formation(see also 66.30.-h Diffusion in solids, for diffusion of adsorbates, see 68.43.Jk)

• Journal: Acta Physica Polonica A
• Year: 2009
• Volume: 115
• Issue: 3
• Pages: 694-698

Dates

published

2009-03

received

2008-06-18

(unknown)

2008-12-26

Contributors

author

A. Calik

• Department of Mechanical Education, Technical Education Faculty, Suleyman Demirel University, Isparta, Turkey

author

O. Sahin

• Physics Department, Art and Science Faculty, Mustafa Kemal University, Hatay, Turkey

author

N. Ucar

• Physics Department, Art and Science Faculty, Suleyman Demirel University, Isparta, Turkey

References

• 1. M.C.M. Farias, R.M. Souza, A. Sinatora, D.K. Tanaka, Wear 263, 111 (2007)
• 2. U. Sen, S. Sen, Mater. Character. 50, 261 (2003)
• 3. P.A. Dearnley, G. Aldrich-Schmith, Wear 256, 491 (2004)
• 4. L. Shi, D.O. Northwood, Acta Mater. 43, 453 (1995)
• 5. E. Atik, Mater. Struct. 31, 418 (1998)
• 6. A. Erdemir, C. Bindal, Surf. Coat. Technol. 76-77, 443 (1995)
• 7. I. Ozbek, C. Bindal, Surf. Coat. Technol. 154, 14 (2002)
• 8. B.S. Mann, Wear 208, 125 (1997)
• 9. R.X. Yan, X.M. Zhang, J.W. Xu, Z.G. Wu, Q.M. Song, Mater. Chem. Phys. 71, 107 (2001)
• 10. A.P. Antoniou, R. Onck, A.F. Bastawros, Acta Mater. 52, 2377 (2004)
• 11. E.W. Andrews, Mater. Lett. 57, 532 (2002)
• 12. W.Y. Lu, M.F. Horstemeyer, J.S. Korellis, R.B. Grishabar, D. Mosher, Theor. Appl. Fract. Mech. 30, 139 (1998)
• 13. F.J. Gomez, M. Elices, Eng. Fract. Mech. 70, 1913 (2003)
• 14. S.Y. Shin, B. Hwang, S. Lee, N.J. Kim, S.S. Ahn, Mater. Sci. Eng. A 458, 281 (2007)
• 15. K. Delikanlı, A.H. Calik, A. Uzun, Fen Bilimleri Enstitüsü Dergisi 5, 99 (2003) (in Turkish)
• 16. M. Usta, Surf. Coat. Technol. 194, 251 (2005)
• 17. T.S. Eyre, Wear 34, 383 (1975)
• 18. K.G. Anthymidis, G. Stergioudis, D.N. Tsipas, Sci. Technol. Adv. Mater. 3, 303 (2002)
• 19. C.M. Brakman, A.W.J. Gommers, E.J. Mittemeijer, Mater. Res. 4, 1354 (1989)
• 20. H. Kemi, C. Sasaki, M. Kitamura, N. Satomi, Y. Ueda, M. Nishikawa, J. Nucl. Mater. 26, 1108 (1999)
• 21. L.L. Oian, G.A. Stone, J. Mater. Eng. Performance 4, 59 (1995)
• 22. E. Atik, U. Yunker, C. Meric, Tribol. Int. 36, 155 (2003)
• 23. A.K. Sinha, Boronizing, ASM Int., Materials Park (Oh) 1991, Vol. 4, Sect. 2, p. 437
• 24. I. Jauhari, S. Rozali, N. Masdek, O. Hiroyuki, Mater. Sci. Eng. A 466, 230 (2007)
• 25. F. Bohner, J.K. Gregory, U. Weber, S. Schmauder, Mech. Mater. 31, 627 (1999)
• 26. Y.J. Chao, J.D. Ward Jr., R.G. Sands, Mater. Design 28, 551 (2007)
• 27. X. Wu, X. Pan, J.F. Stubbins, J. Nucl. Mater. 361, 228 (2007)

Identifiers

DOI

10.12693/APhysPolA.115.694