Preferences help
enabled [disable] Abstract
Number of results
2017 | 132 | 3 | 886-888
Article title

Characterization of Nanocrystalline Cu25Mo Electrical Contact Material Synthesized via Ball Milling

Title variants
Languages of publication
In this study, Cu-based Mo-doped composite powder was synthesized by ball milling technique. Elemental powder mixture containing 25 wt.% Mo was milled in a high-energy planetary-type ball mill to achieve homogeneously mixed composite powder. Characterization of the starting and the milled powders was carried out using scanning electron microscopy and laser diffraction analysis. It was found that particle size of powder had gradually decreased with increasing milling duration. scanning electron microscope pictures, corresponding to the later stages of milling process prove that nanocrystalline powders were obtained after milling duration of 30 h. Prolonged milling durations lead to powder contamination, which is undesirable for contact applications, where the purity is of big importance. Therefore, optimum milling duration was determined to be 30 h.
  • Karadeniz Technical University, Abdullah Kanca Vocational School, Department of Machinery and Metal Technologies, Trabzon, Turkey
  • [1] P.G. Slade, Electrical Contacts: Principles and Applications, CRC, Boca Raton 2014
  • [2] S. Biyik, F. Arslan, M. Aydin, J. Electronic Mater. 44, 457 (2015), doi: 10.1007/s11664-014-3399-4
  • [3] ASM Handbook, Vol. 7, Powder Metal Technologies and Applications, ASM International Materials Park, Ohio 1998
  • [4] S. Biyik, M. Aydin, Acta Phys. Pol. A 127, 1255 (2015), doi: 10.12693/APhysPolA.127.1255
  • [5] G. Li, H. Cui, J. Chen, X. Fang, W. Feng, J. Liu, J. Alloys Compounds 696, 1228 (2017), doi: 10.1016/j.jallcom.2016.12.092
  • [6] S. Eksi, K. Genel, Acta Phys. Pol. A 128, B-59 (2015), doi: 10.12693/APhysPolA.128.B-59
  • [7] A. Akkas, A.B. Tugrul, B. Buyuk, A.O. Addemir, M. Marsoglu, B. Agacan, Acta Phys. Pol. A 128, B-176 (2015), doi: 10.12693/APhysPolA.128.B-176
  • [8] H. Li, X. Wang, X. Guo, X. Yang, S. Liang, Mater. Design 114, 139 (2017), doi: 10.1016/j.matdes.2016.10.056
  • [9] N. Ozsoy, M. Ozsoy, A. Mimaroglu, Acta Phys. Pol. A 128, B-55 (2015), doi: 10.12693/APhysPolA.128.B-55
  • [10] M.A. Al-Akhras, S. Saq'an, Z. Ghadieh, Acta Phys. Pol. A 130, 447 (2016), doi: 10.12693/APhysPolA.130.447
  • [11] J. Wang, W. Liu, D. Li, Y. Wang, J. Alloys Compounds 588, 378 (2014), doi: 10.1016/j.jallcom.2013.11.040
  • [12] S. Biyik, M. Aydin, Acta Phys. Pol. A 129, 656 (2016), doi: 10.12693/APhysPolA.129.656
  • [13] H. Li, X. Wang, Y. Liu, X. Guo, Vacuum 135, 55 (2017), doi: 10.1016/j.vacuum.2016.10.031
  • [14] Z. Lin, S. Liu, J. Li, J. Chen, M. Xie, X. Li, M. Zhang, Q. Zhu, D. Huo, X. Sun, Mater. Design 108, 640 (2016), doi: 10.1016/j.matdes.2016.06.123
  • [15] J. Wang, Y. Kang, C. Wang, J. Alloys Compounds 686, 702 (2016), doi: 10.1016/j.jallcom.2016.05.271
  • [16] V. Cosovic, A. Cosovic, N. Talijan, D. Zivkovic, D. Manasijevic, D. Minic, J. Alloys Compounds 567, 33 (2013), doi: 10.1016/j.jallcom.2013.03.094
Document Type
Publication order reference
YADDA identifier
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.