Journal
Article title
Authors
Title variants
Languages of publication
Abstracts
Chopped E-glass fiber-reinforced epoxy composites (10%, 30% and 50%) were fabricated and their mechanical and tribological behaviour was investigated. Three-point bending tests were performed according to the ASTMD790 and tensile tests were performed according to the ASTMD638 standards. Impact tests and hardness measurements of the composites were also carried out. Wear behaviour of composites was studied using pin on disc wear testing device. The design of experiments approach, using Taguchi method, was employed to analyze the results. Signal-to-noise ratio and analysis of variance were used to determine the influence of parameters on the wear rate and coefficient of friction.
Discipline
- 07.05.Fb: Design of experiments
- 81.70.Bt: Mechanical testing, impact tests, static and dynamic loads(see also 62.20.M- Structural failure of materials; 46.50.+a Fracture mechanics, fatigue, and cracks)
- 62.20.Qp: Friction, tribology, and hardness(see also 46.55.+d Tribology and mechanical contacts in continuum mechanics of solids; for materials treatment effects on friction related properties, see 81.40.Pq)
- 81.05.Qk: Reinforced polymers and polymer-based composites
Journal
Year
Volume
Issue
Pages
852-856
Physical description
Dates
published
2017-09
Contributors
author
- Sakarya University, Faculty of Engineering, Mechanical Engineering Department, Serdivan, Sakarya, Turkey
author
- Sakarya University, Faculty of Engineering, Mechanical Engineering Department, Serdivan, Sakarya, Turkey
author
- Sakarya University, Faculty of Engineering, Mechanical Engineering Department, Serdivan, Sakarya, Turkey
References
- [1] F.C. Campbell, Structural composite materials, ASM International, 2010
- [2] Siddhartha, K. Gupta, Mater. Des. 35, 467 (2012), doi: 10.1016/j.matdes.2011.09.010
- [3] S. Eksi, K. Genel, Acta Phys. Pol. A 128, B-59 (2015), doi: 10.12693/APhysPolA.128.B-59
- [4] T.R. Hemanth Kumar, R.P. Swamyand, T.K. Chandrashekar, J. Miner. Mater. Charact. Engin. 10, 1179 (2011)
- [5] S. Koksal, F. Ficici, R. Kayikci, O. Savas, Mater. Des. 42, 124 (2012), doi: 10.1016/j.matdes.2012.05.048
- [6] Y. Sahin, Tribol. Int. 43, 939 (2010), doi: 10.1016/j.triboint.2009.12.056
- [7] Y. Sahin, Mater. Sci. Engin. A 408, 1 (2005), doi: 10.1016/j.msea.2004.11.012
- [8] M. Uzun, K. Yildiz, Acta Phys. Pol. A 128, B-337 (2015), doi: 10.12693/APhysPolA.128.B-337
- [9] B. Suresha, G. Chandramohan, Siddaramaiah, P. Samapthkumaran, S. Seetharamu, Mater. Sci. Engin. A 443, 285 (2007), doi: 10.1016/j.msea.2006.09.016
- [10] H. Pıhtılı, Europ. Polymer J. 45, 149 (2009), doi: 10.1016/j.eurpolymj.2008.10.006
- [11] R. MD. Nasir, M.M. Azizan, J. Thermoplastic Compos. Mater. 24, 861 (2011), doi: 10.1177/0892705711404461
- [12] K. Yilmazcoban, S. Doner, Acta Phys. Pol. A 130, 342 (2016), doi: 10.12693/APhysPolA.130.342
- [13] ASTM G99-95 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
- [14] A. Gunen, Acta Phys. Pol. A 130, 217 (2016), doi: 10.12693/APhysPolA.130.217
- [15] E. Kanca, F. Cavdar, M.M. Ersen, Acta Phys. Pol. A 130, 365 (2016), doi: 10.12693/APhysPolA.130.365
- [16] ASTM D638M-96, Standard test method for tensile properties of plastics (metric), American Society for Testing and Material, 1996
- [17] ASTM D790-10, Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials, American Society for Testing and Material, 2010
- [18] ASTM D4812-11, Standard test method for unnotched cantilever beam impact resistance of plastics, American Society for Testing and Material, 2011
- [19] ASTM D-2583, Standard test method for indentation hardness of rigid plastics by means of a Barcol impressor, American Society for Testing and Material, 2013
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-app132z3-iip014kz