PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 132 | 3 | 852-856
Article title

Mechanical and Tribological Behaviour of Chopped E-Glass Fiber-Reinforced Epoxy Composite Materials

Content
Title variants
Languages of publication
EN
Abstracts
EN
Chopped E-glass fiber-reinforced epoxy composites (10%, 30% and 50%) were fabricated and their mechanical and tribological behaviour was investigated. Three-point bending tests were performed according to the ASTMD790 and tensile tests were performed according to the ASTMD638 standards. Impact tests and hardness measurements of the composites were also carried out. Wear behaviour of composites was studied using pin on disc wear testing device. The design of experiments approach, using Taguchi method, was employed to analyze the results. Signal-to-noise ratio and analysis of variance were used to determine the influence of parameters on the wear rate and coefficient of friction.
Keywords
Year
Volume
132
Issue
3
Pages
852-856
Physical description
Dates
published
2017-09
References
  • [1] F.C. Campbell, Structural composite materials, ASM International, 2010
  • [2] Siddhartha, K. Gupta, Mater. Des. 35, 467 (2012), doi: 10.1016/j.matdes.2011.09.010
  • [3] S. Eksi, K. Genel, Acta Phys. Pol. A 128, B-59 (2015), doi: 10.12693/APhysPolA.128.B-59
  • [4] T.R. Hemanth Kumar, R.P. Swamyand, T.K. Chandrashekar, J. Miner. Mater. Charact. Engin. 10, 1179 (2011)
  • [5] S. Koksal, F. Ficici, R. Kayikci, O. Savas, Mater. Des. 42, 124 (2012), doi: 10.1016/j.matdes.2012.05.048
  • [6] Y. Sahin, Tribol. Int. 43, 939 (2010), doi: 10.1016/j.triboint.2009.12.056
  • [7] Y. Sahin, Mater. Sci. Engin. A 408, 1 (2005), doi: 10.1016/j.msea.2004.11.012
  • [8] M. Uzun, K. Yildiz, Acta Phys. Pol. A 128, B-337 (2015), doi: 10.12693/APhysPolA.128.B-337
  • [9] B. Suresha, G. Chandramohan, Siddaramaiah, P. Samapthkumaran, S. Seetharamu, Mater. Sci. Engin. A 443, 285 (2007), doi: 10.1016/j.msea.2006.09.016
  • [10] H. Pıhtılı, Europ. Polymer J. 45, 149 (2009), doi: 10.1016/j.eurpolymj.2008.10.006
  • [11] R. MD. Nasir, M.M. Azizan, J. Thermoplastic Compos. Mater. 24, 861 (2011), doi: 10.1177/0892705711404461
  • [12] K. Yilmazcoban, S. Doner, Acta Phys. Pol. A 130, 342 (2016), doi: 10.12693/APhysPolA.130.342
  • [13] ASTM G99-95 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
  • [14] A. Gunen, Acta Phys. Pol. A 130, 217 (2016), doi: 10.12693/APhysPolA.130.217
  • [15] E. Kanca, F. Cavdar, M.M. Ersen, Acta Phys. Pol. A 130, 365 (2016), doi: 10.12693/APhysPolA.130.365
  • [16] ASTM D638M-96, Standard test method for tensile properties of plastics (metric), American Society for Testing and Material, 1996
  • [17] ASTM D790-10, Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials, American Society for Testing and Material, 2010
  • [18] ASTM D4812-11, Standard test method for unnotched cantilever beam impact resistance of plastics, American Society for Testing and Material, 2011
  • [19] ASTM D-2583, Standard test method for indentation hardness of rigid plastics by means of a Barcol impressor, American Society for Testing and Material, 2013
Document Type
Publication order reference
YADDA identifier
bwmeta1.element.bwnjournal-article-app132z3-iip014kz
Identifiers
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.