Preferences help
enabled [disable] Abstract
Number of results
2017 | 132 | 3 | 819-821
Article title

Application of Data Communication to the Detection and Correction of Power System Faults

Title variants
Languages of publication
Data communication is an important part in modern industrial processes and is necessary in automation, monitoring, and protection purposes. This paper aims at designing a real time communication between two computers for interchanging the state of a three phase circuit to emulate a transmission line protection system in power substation. The circuit designed in Proteus ISIS is based on "symmetrical component theory" and the algorithm for exchanging data between two computers is built using TCP/IP protocol in LABVIEW environment. The application consists of monitoring and controlling three phase lines by sending the data collected to one of the computers and sending the commands back to trip relays if any fault is detected. The purpose is to prevent the propagation of this fault and to connect other sources to maintain the flow of power to the load.
Physical description
  • [1] K. Djaballah Boudjebiba, M. Boussentoh, Final Year Project Report, Institute of Electrical and Electronic Engineering, Boumerdes 2012
  • [2] O. Boukhenane, H.E. Debbah, Final Year Project Report, Institute of Electrical and Electronic Engineering, Boumerdes 2012
  • [3] S. Mohagheghi, J. Stoupis, Z. Wang, Communication Protocols and Networks for Power Systems - Current Status and Future Trends, IEEE Explore, 2009
  • [4] OSI reference model (Open Systems Interconnection), TechTarget
  • [5] A. Stelios, Networking Basics: TCP, UDP, TCP/IP and OSI Model
  • [6] The TCP/IP Guide, TCP Characteristics: How TCP Does What It Does
  • [7] The TCP/IP protocol suite, Unicen
  • [8] TCP/IP Tutorial and Technical Overview December 2006
  • [9] Modbus Protocol Reference Guide PI-MBUS-300 Rev. J, Modicon, North Andover 1996
  • [10] G. Thomas, Extension, Control Network 9, 4 (2008)
  • [11] R. Hair, Modbus interface tutorial, 2009
  • [12] MODBUS over serial line specification and implementation guide, V.1
  • [13] J.D. Glover, S. Sarma, T. Overbye, Power System Analysis and Design, 4th ed., Cengage 2007
  • [14] Functions and VI Reference Manual, National Instruments Corporation, 1998
  • [15] LABVIEW Demonstration Guide, National Instruments Corporation, 1996
  • [16] A. Özdemir, Z. Erdem, I. Usuman, Acta. Phys. Pol. A 130, 228 (2016), doi: 10.12693/APhysPolA.130.228
  • [17] T. Aydogan, I. Ozcelik, I. Erturk, H. Ekiz, Acta. Phys. Pol. A 130, 412 (2016), doi: 10.12693/APhysPolA.130.412
  • [18] P. Stefanov, A. Savić, G. Dobrić, Acta. Phys. Pol. A 128, B-138 (2016), doi: 10.12693/APhysPolA.128.B-138
  • [19] M.J. Pazdanowski, Acta. Phys. Pol. A 128, B-213 (2016), doi: 10.12693/APhysPolA.128.B-213
  • [20] Y. Sarikaya, H. Apaydin, Ş. Kıtış, Acta. Phys. Pol. A 128, B-211 (2016), doi: 10.12693/APhysPolA.128.B-211
Document Type
Publication order reference
YADDA identifier
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.