Full-text resources of PSJD and other databases are now available in the new Library of Science.
Visit https://bibliotekanauki.pl

PL EN


Preferences help
enabled [disable] Abstract
Number of results

Journal

2009 | 7 | 2 | 270-278

Article title

Surface and interface properties of thin pentacene and parylene layers

Content

Title variants

Languages of publication

EN

Abstracts

EN
To improve Organic Thin Film Transistor (OTFT) properties we study OTFT semiconductor/dielectric interfacial properties via examination of the gate dielectric using thin Parylene C layer. Structural and morphology properties of pentacene layers deposited on parylene layer and SiO2/Si substrate structure were compared. The surface morphology was investigated using atomic force microscopy (AFM) and scanning electron microscopy (SEM). AFM topography of pentacene layer in non-contact mode confirmed the preferable pentacene grain formation on parylene surface in dependence on layer thickness. The distribution of chemical species on the surfaces and composition depth profiles were measured by secondary ion mass spectroscopy (SIMS) and surface imaging. The depth profiles of the analyzed structures show a homogenous pentacene layer, characterized with C or C2 ions. Relatively sharp interface between pentacene and parylene layers was estimated by characteristic increased intensity of CCl ions peak. For revealing the pentacene phases in the structures the Micro-Raman spectroscopy was utilized. Conformal coatings of parylene and pentacene layers without pinholes resulted from the deposition process as was confirmed by SIMS surface imaging. For the pentacene layers thicker than 20 nm, both thin and bulk pentacene phases were detected by Micro-Raman spectroscopy, while for the pentacene layer thickness of 5 and 10 nm the preferable thin phase was detected. The complete characterisation of pentacene layers deposited on SiO2 and parylene surface revealed that the formation of large grains suggests 3D pentacene growth at parylene layer with small voids between grains and more than one monolayer step growth. The results will be utilized for optimization of the deposition process.

Keywords

Publisher

Journal

Year

Volume

7

Issue

2

Pages

270-278

Physical description

Dates

published
1 - 6 - 2009
online
26 - 4 - 2009

Contributors

author
  • Department of Microelectronics, FEI STU, Ilkoviaova 3, 812 19, Bratislava, SK
  • Department of Microelectronics, FEI STU, Ilkoviaova 3, 812 19, Bratislava, SK

References

  • [1] D. Filietal, J. Micromech. Microeng 16, 1555 (2006) http://dx.doi.org/10.1088/0960-1317/16/8/016[Crossref]
  • [2] K. Tsukagoshi et al., Appl. Phys. Lett. 87, 183502 (2005)
  • [3] I. Kymissisetal, J. Vac. Sci. Technol. B 20, 956 (2002) http://dx.doi.org/10.1116/1.1477427[Crossref]
  • [4] V. Podzorovetal, Appl. Phys. Lett. 82, 1739 (2003) http://dx.doi.org/10.1063/1.1560869[Crossref]
  • [5] K. N. N. Unnietal, J. Mater Sci. 41, 317 (2006) http://dx.doi.org/10.1007/s10853-005-2331-y[Crossref]
  • [6] J. Jakabovicetal, Microelectr. J., 40, 595 (2009) http://dx.doi.org/10.1016/j.mejo.2008.06.029[Crossref]
  • [7] A. F. Stassenetal, Appl. Phys. Lett. 85, 3899 (2004) http://dx.doi.org/10.1063/1.1812368[Crossref]
  • [8] D. J. Gundlach et al., IEEE Electr. Device L. 18, 87 (1997) http://dx.doi.org/10.1109/55.556089[Crossref]
  • [9] G. Horowitz et al., The International Symposium on Super-Functionality Organic Devices, 25–28 Oct. 2004, Chiba University, Japan, IPAP Conference series 6 (2005) 125
  • [10] J. H. Park et al., Materials Science and Engineering C 24, 27 (2004) http://dx.doi.org/10.1016/j.msec.2003.09.064[Crossref]
  • [11] P. G. Evansetal, Physica B 401, 686 (2007)
  • [12] Y. D. Parketal, Materials Today 10, 46 (2007)
  • [13] A. Fachettietal, Adv. Mater. 17, 1705 (2005) http://dx.doi.org/10.1002/adma.200500517[Crossref]
  • [14] B. Stadloberetal, Phys. Rev. B 74, 165302 (2006)
  • [15] N. Benson et al., Phys. Status Solidi A 205, 475 (2008) http://dx.doi.org/10.1002/pssa.200723421[Crossref]
  • [16] T. Diekmann et al., Phys. Status Solidi A 205, 564 (2008) http://dx.doi.org/10.1002/pssa.200723406[Crossref]
  • [17] Ch. Kim, et al., Science 318, 76, (2007) http://dx.doi.org/10.1126/science.1146458[Crossref]
  • [18] S. I. Shinetal, Appl. Surf. Sci. 254, 6987 (2008) http://dx.doi.org/10.1016/j.apsusc.2008.05.092[Crossref]
  • [19] Ch. D. Dimitrakopoulos et al., Adv. Mater. 14, 99 (2002) http://dx.doi.org/10.1002/1521-4095(20020116)14:2<99::AID-ADMA99>3.0.CO;2-9[Crossref]
  • [20] K. P. Pernstichetal, J. Appl. Phys. 96, 6431 (2004) http://dx.doi.org/10.1063/1.1810205[Crossref]
  • [21] H. L. Cheng et al., Adv. Funct. Mater. 17, 3639 (2007) http://dx.doi.org/10.1002/adfm.200700207[Crossref]
  • [22] R. He et al., Appl. Phys. Lett. 84, 987 (2004) http://dx.doi.org/10.1063/1.1646756[Crossref]

Document Type

Publication order reference

Identifiers

YADDA identifier

bwmeta1.element.-psjd-doi-10_2478_s11534-009-0018-8
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.