PL EN


Preferences help
enabled [disable] Abstract
Number of results
Journal
2014 | 12 | 11 | 1183-1193
Article title

Corrosion properties of Zn-Ni-P alloys in neutral model medium

Content
Title variants
Languages of publication
EN
Abstracts
EN
The presented work reports on the peculiarities of the anodic behavior, corrosion resistance and protective ability of electrodeposited Zn-Ni-P alloys with a different composition in a model corrosion medium of 5% NaCl. Three characteristic coating types have been investigated using experimental methods such as potentiodynamic polarization (PD) technique and polarization resistance (Rp) measurements. In addition, X-ray diffraction (XRD) analysis as well as scanning electron microscopy (SEM) coupled with an Energy-dispersive X-ray (EDAX) device were applied to determine the differences in the chemical composition and surface morphology which appeared as a result of the corrosion treatment. The data obtained are compared to those of electrodeposited pure Zn coatings with identical experimental conditions demonstrating the enhanced protective characteristics of the ternary alloys during the test period in the model medium. The influence of the chemical and phase composition of the alloys on its corrosion resistance and protective ability is also commented and discussed.
Publisher

Journal
Year
Volume
12
Issue
11
Pages
1183-1193
Physical description
Dates
published
1 - 11 - 2014
online
15 - 5 - 2014
Contributors
  • Bulgarian Academy of Sciences
  • Bulgarian Academy of Sciences
  • Bulgarian Academy of Sciences
References
  • [1] A. Brenner, Electrodeposition of Alloys, Principles and Practice (Academic Press, New York, 1963)
  • [2] P.R. Seré, J.D. Culcasi, C.I. Elsner, A.R. Di Sarli, Surf. Coat. Technol. 122, 143 (1999) http://dx.doi.org/10.1016/S0257-8972(99)00325-4[Crossref]
  • [3] H. Park, J.A. Szpunar, Corr. Sci. 40, 525 (1998) http://dx.doi.org/10.1016/S0010-938X(97)00148-0[Crossref]
  • [4] G. Vourlias et al, Surf. Coat. Technol. 200, 6594 (2006) http://dx.doi.org/10.1016/j.surfcoat.2005.11.039[Crossref]
  • [5] E. Almeida, M. Morcillo, B. Rosales, Brit. Cor. Journal 35, 289 (2000) http://dx.doi.org/10.1179/000705900101501362[Crossref]
  • [6] A.R. Mendoza, F. Corvo, Corr. Sci. 42, 1123 (2000) http://dx.doi.org/10.1016/S0010-938X(99)00135-3[Crossref]
  • [7] M. Bučko et al., Surf. Coat. Technol. 228, 221 (2013) http://dx.doi.org/10.1016/j.surfcoat.2013.04.032[Crossref]
  • [8] M. Bučko et al., J. of Solid State Electrochem. 17(5), 1409 (2013) http://dx.doi.org/10.1007/s10008-013-2004-8[Crossref]
  • [9] N. Boshkov et al., Surf. Coat. Technol. 157(2–3), 171 (2002) http://dx.doi.org/10.1016/S0257-8972(02)00161-5[Crossref]
  • [10] N. Boshkov, Surf. Coat. Technol. 172(2–3), 215 (2003)
  • [11] Z.F. Lodhi et al., Surf. Coat. Technol. 202, 84 (2007) http://dx.doi.org/10.1016/j.surfcoat.2007.04.070[Crossref]
  • [12] C. Müller, M. Sarret, T. Andreu, J. Electrochem Soc. 149, C600 (2002) http://dx.doi.org/10.1149/1.1512668[Crossref]
  • [13] M. Li, S. Luo et al., J. Electrochem Soc. 154, D567 (2007) http://dx.doi.org/10.1149/1.2772093[Crossref]
  • [14] H. Fukushima et al., The Iron and Steel Inst. of Japan (ISIJ International) 33, 1009 (1993) http://dx.doi.org/10.2355/isijinternational.33.1009[Crossref]
  • [15] J.H. Liu et al., Materials and Corrosion 64(4), 335 (2013) http://dx.doi.org/10.1002/maco.201106140[Crossref]
  • [16] Y. Ullal, A. Chitharanjan Hegde, Sciences and Engineering 59(3), 47 (2012)
  • [17] J.-L. Chen, J.-H. Liu, S.-M Li, M. Yu, Materials and Corrosion 63(7), 607 (2012)
  • [18] R. Ramanauskas, L. Gudavičiute, A. Kosenko, O. Girčiene, Transactions of the Inst. of Metal Finishing 90(3), 137 (2012) http://dx.doi.org/10.1179/0020296712Z.00000000021[Crossref]
  • [19] A.P Ordine, S.L Díaz, I.C.P. Margarit, O.R. Mattos, Electrochimica Acta 49, 2815 (2004) http://dx.doi.org/10.1016/j.electacta.2004.01.044[Crossref]
  • [20] V. Bachvarov, M. Peshova, S. Vitkova, N. Boshkov, Materials Chemistry and Physics, 136(2–3), 999 (2012) http://dx.doi.org/10.1016/j.matchemphys.2012.08.039[Crossref]
  • [21] A. Krishiyer, M. Ramasubramanian, B.N. Popov, R.E. White, Plating and Surface Finishing 99 (1999)
  • [22] A. Popescu et al., REV. CHIM. (Bucharest) 62(9), 899 (2011) (in Romanian)
  • [23] S. Swathirajan, Y. Mikhail, J. Electrochem. Soc. 136(8), 2188 (1989) http://dx.doi.org/10.1149/1.2097251[Crossref]
  • [24] M. Stern, A.L. Geary, J. Electrochem. Soc. 104, 56 (1957) http://dx.doi.org/10.1149/1.2428496[Crossref]
  • [25] R.V. Skold, T.E. Larson, Corrosion 13, 69 (1957)
  • [26] W. Kraus, G. Nolze, Powder Cell for Windows, Version 2.4 (Federal Institute of Materials Research and Testing, Berlin, Germany, 2000)
  • [27] S.-I. Pyun, J. Won Lee, Progress in Corrosion Science and Engineering II, (Springer, 2012) http://dx.doi.org/10.1007/978-1-4419-5578-4[WoS][Crossref]
  • [28] N. Boshkov, S. Vitkova, K. Petrov, Metal Finishing 99(9), 56 (2001) http://dx.doi.org/10.1016/S0026-0576(01)81437-9[Crossref]
  • [29] N. Boshkov, St. Nemska, S. Vitkova, Metal Finishing 100(5), 14 (2002) http://dx.doi.org/10.1016/S0026-0576(02)80367-1[Crossref]
  • [30] L.M. Chang, D. Chen, J.H. Liu, R.J. Zhang, J. Alloys Comp. 479, 489 (2009) http://dx.doi.org/10.1016/j.jallcom.2008.12.108[Crossref]
  • [31] R. Rizwan et al., Materials Transactions 48(6), 1558 (2007) http://dx.doi.org/10.2320/matertrans.MER2007022[Crossref]
  • [32] K. Wykpis, A. Budniok, J. Kubisztal, E. Łągiewka, Advances in Manufacturing Science and Technology 33(3), 41 (2009)
  • [33] A.M. Popescu et al., Cent. Eur. J. Chem. 11(7), 1137 (2013) http://dx.doi.org/10.2478/s11532-013-0236-1[Crossref]
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.-psjd-doi-10_2478_s11532-014-0564-9
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.