PL EN


Preferences help
enabled [disable] Abstract
Number of results
Journal
2013 | 11 | 7 | 1187-1200
Article title

Catalysis and compensation effect of K2CO3 in low-rank coal - CO2 gasification

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
The CO2 gasification of a low rank coal catalysed by K2CO3 was studied, at 700–950°C and 1 atm. A two level full factorial design revealed that the gasification reaction was sensitive to the solid residence time, reaction temperature, CO2 partial pressure and catalyst load. K2CO3 was an efficient catalyst at all temperatures studied, particularly during the second stage when the Boudouard reaction dominates. The gasification rate was increased continuously with increasing catalyst load up to a load of ∼20% w/w K2CO3 concentration, following a sigmoid curve. Above this point, limited catalytic effect was observed, possibly due to the saturation of the lignite surface by K+. A correlation was found to exist between the catalytic gasification rate and the Alkali Index, which increased with the impregnation of the inorganic K2CO3 salt. When K2CO3 load increased, the Arrhenius parameters, E and k 0, increased simultaneously exhibiting a compensation effect. The isokinetic temperature was found about 600 to 650°C corresponding to the minimum temperature required for the formation of catalytic active intermediates. At temperatures studied, the catalytic active intermediates seemed to be always present and the catalysis progresses unhindered due to the redox cycle, resulting in high rates and conversion. [...]
Publisher
Journal
Year
Volume
11
Issue
7
Pages
1187-1200
Physical description
Dates
published
1 - 7 - 2013
online
26 - 4 - 2013
References
  • [1] A.J. Minchener, Fuel 84, 2222 (2005) http://dx.doi.org/10.1016/j.fuel.2005.08.035[Crossref]
  • [2] Y.Q. Ren, S.S. Xu, S.W. Gao, In: R. Rivero, et al., (Eds.), The development status and tendency of coal gasification technology with dry coal feed in China Energy-Efficient, Cost-Effective and Environmentally-Sustainable Systems and Processes 1–3, 505 (2004)
  • [3] Sh. Li, Y. Cheng, Fuel 74(3), 456 (1985) http://dx.doi.org/10.1016/0016-2361(95)93482-S[Crossref]
  • [4] J. Walker, L. Philip, S. Matsumoto, T. Hanzawa, T. Muira, I.M.K. Ismail, Fuel 62, 140 (1983) http://dx.doi.org/10.1016/0016-2361(83)90186-2[Crossref]
  • [5] H. Freund, Fuel 64, 657 (1985) http://dx.doi.org/10.1016/0016-2361(85)90051-1[Crossref]
  • [6] D.W. McKee, C.L. Spiro, P.G. Kosky, E.J. Lamby, Fuel 64, 805 (1985) http://dx.doi.org/10.1016/0016-2361(85)90014-6[Crossref]
  • [7] J.T. Gallagher, H. Harker, Carbon 2, 163 (1964) http://dx.doi.org/10.1016/0008-6223(64)90057-0[Crossref]
  • [8] J.L. Figueiredo, J. Rivera-Utrilla, M.A. Ferro-Garcia, Carbon 25, 703 (1987) http://dx.doi.org/10.1016/0008-6223(87)90226-0[Crossref]
  • [9] R.A. Ross, P. Fong, Ind. Eng. Chem. Prod. Res. Div. 20, 197 (1981) http://dx.doi.org/10.1021/i300001a031[Crossref]
  • [10] W.F. DeGroot, G.N. Richards, Fuel 67, 352 (1988) http://dx.doi.org/10.1016/0016-2361(88)90318-3[Crossref]
  • [11] D.W. McKee, D. Chatterji, Carbon 13, 381 (1975) http://dx.doi.org/10.1016/0008-6223(75)90006-8[Crossref]
  • [12] M.J. Veraa, A.T. Bell, Fuel 57, 194 (1978) http://dx.doi.org/10.1016/0016-2361(78)90116-3[Crossref]
  • [13] K.-T. Kim, K.-H. Kim, J.-O. Choi, Fuel 68, 1343 (1989) http://dx.doi.org/10.1016/0016-2361(89)90253-6[Crossref]
  • [14] L.R. Radovic, J. Walker, L. Philip, R.G. Jenkins, Fuel 63, 1028 (1984) http://dx.doi.org/10.1016/0016-2361(84)90329-6[Crossref]
  • [15] T. Takarada, S. Ichinose, K. Kato, Fuel 71, 883 (1992) http://dx.doi.org/10.1016/0016-2361(92)90237-I[Crossref]
  • [16] G. Skodras, G.P. Sakellaropoulos 77–78, 151 (2002)
  • [17] B.B. Beamish, K.J. Shaw, K.A. Rodgers, J. Newman, Fuel Process. Technol. 53, 243 (1998) http://dx.doi.org/10.1016/S0378-3820(97)00073-8[Crossref]
  • [18] D.P. Ye, J.B. Agnew, D.K. Zhang, Fuel 77, 1209 (1998) http://dx.doi.org/10.1016/S0016-2361(98)00014-3[Crossref]
  • [19] M. Sakawa, Y. Sakurai, Y. Hara, Fuel 61, 717 (1982) http://dx.doi.org/10.1016/0016-2361(82)90245-9[Crossref]
  • [20] D.W. McKee, Carbon 20, 59 (1982) http://dx.doi.org/10.1016/0008-6223(82)90075-6[Crossref]
  • [21] D.W. McKee, C.L. Spiro, P.G. Kosky, E.J. Lamby, Fuel 62, 217 (1983) http://dx.doi.org/10.1016/0016-2361(83)90202-8[Crossref]
  • [22] D.W. McKee, C.L. Spiro, P.G. Kosky, E.J. Lamby, Fuel 62, 180 (1983) http://dx.doi.org/10.1016/0016-2361(83)90194-1[Crossref]
  • [23] C.L. Spiro, D.W. McKee, P.G. Kosky, E.J. Lamby, Fuel 63, 133 (1984) http://dx.doi.org/10.1016/0016-2361(84)90268-0[Crossref]
  • [24] S. Yokoyama, K. Miyahara, K. Tanaka, I. Takakowa, J. Tashiro, Fuel 58, 510 (1979) http://dx.doi.org/10.1016/0016-2361(79)90169-8[Crossref]
  • [25] J.T Sears, H.S. Muraldihara, C.Y. Wen, Ind. Eng. Chem. Proc. Des. Dev. 19, 358 (1980) http://dx.doi.org/10.1021/i260075a005[Crossref]
  • [26] F. Kapteijn, J.A. Moulijn, Fuel 62, 221 (1983) http://dx.doi.org/10.1016/0016-2361(83)90203-X[Crossref]
  • [27] W.-Y. Wen, Catal Rev.-Sci. Eng. 22(1), 1 (1980) http://dx.doi.org/10.1080/03602458008066528[Crossref]
  • [28] C.A. Mims and J.K Pabst, Am Chem Soc Div Fuel Chem 29, 160 (1984)
  • [29] D.A Sams and F. Shadman, AIChE J 32(7), 1132 (1986) http://dx.doi.org/10.1002/aic.690320710[Crossref]
  • [30] S.J. Yuh and C.E. Wolf Fuel 62, 252 (1983) http://dx.doi.org/10.1016/0016-2361(83)90211-9[Crossref]
  • [31] T. Wigmans, J.C. Goebel, J.A. Moulijn, Carbon 21, 295 (1983) http://dx.doi.org/10.1016/0008-6223(83)90094-5[Crossref]
  • [32] S.G Chen, R.T. Yang, J. Catal. 12, 138 (1982)
  • [33] E.L.K. Mui, W.H. Cheung, V.K.C. Lee, G. McKay, Waste Management 30(5), 821 (2010) http://dx.doi.org/10.1016/j.wasman.2010.01.014[Crossref]
  • [34] J. Zsako, M. Lungu, J. Thermal Anal. Calorim. 5(1), 77 (1973) http://dx.doi.org/10.1007/BF01914476[Crossref]
  • [35] A.K. Galwey, Adv Catal 26, 247 (1977) http://dx.doi.org/10.1016/S0360-0564(08)60072-3[Crossref]
  • [36] R. Ranganathan, N.N. Bakhshi, J.F. Mathews, Canad. J. Chem. Eng. 55, 544 (1997) http://dx.doi.org/10.1002/cjce.5450550511[Crossref]
  • [37] G.C. Bond, A.D. Hooper, J.C. Slaa, A.O. Taylor, J. Catal. 163, 319 (1996) http://dx.doi.org/10.1006/jcat.1996.0333[Crossref]
  • [38] G.C. Bond, Applied Catalysis A: General 191, 23 (2000) http://dx.doi.org/10.1016/S0926-860X(99)00302-6[Crossref]
  • [39] C. di Blasi, Progress in Energy and Combustion Science 35, 121 (2009) http://dx.doi.org/10.1016/j.pecs.2008.08.001[Crossref]
  • [40] S.N. Naik, V.V. Goud, P.K. Rout, A.K. Dalai, Renewable and Sustainable Energy Reviews 14, 578 (2010) http://dx.doi.org/10.1016/j.rser.2009.10.003[Crossref]
  • [41] M.C. Gupta, S.G. Viswanath, Journal of Thermal Analysis 53, 931 (1998) http://dx.doi.org/10.1023/A:1010154804771[Crossref]
  • [42] M.T. Sumar-Ristovic, K.K. Andelkovic, D. Poleti, D.M. Minic, Thermochimica Acta 525(1–2), 25 (2011) http://dx.doi.org/10.1016/j.tca.2011.07.017[Crossref]
  • [43] M.C. Wilson, A.K. Galwey, Nature (London) 243(5407), 402 (1973) http://dx.doi.org/10.1038/243402b0[Crossref]
  • [44] G.C.Z. Bond, Phys. Chem. (Munich) 144, 21 (1985) http://dx.doi.org/10.1524/zpch.1985.144.144.021[Crossref]
  • [45] A.K. Galwey, Thermochimica Acta, 242, 259 (1994) http://dx.doi.org/10.1016/0040-6031(94)85030-5[Crossref]
  • [46] H. Marsh, D.A. Tayler, J.R. Lander, Carbon 19(50), 375 (1981) http://dx.doi.org/10.1016/0008-6223(81)90062-2[Crossref]
  • [47] P.L. Walker Jr, F. Rusinko Jr, L.G. Austin, Advances Catal, 11, 133 (1959) http://dx.doi.org/10.1016/S0360-0564(08)60418-6[Crossref]
  • [48] F.S. Feats, P.S. Harris, B.G. Reuben, J. Chem. Sot. Faraday Trans. 70, 2011 (1974) http://dx.doi.org/10.1039/f19747002011[Crossref]
  • [49] E. Cremer, Adv. Catal. 75, 7 (1955)
  • [50] P.P. Feistel, K.H. van Heeck, H. Juntgen, A.H. Pulsifer, Carbon 14(6), 363 (1976) http://dx.doi.org/10.1016/0008-6223(76)90011-7[Crossref]
  • [51] C. Heuchamps, X. Duval, Carbon 4(2), 243 (1966) http://dx.doi.org/10.1016/0008-6223(66)90086-8[Crossref]
  • [52] A.P. Dhupe, A.N. Gorkam, L.K. Doraiswamy, Fuel 70, 839 (1991) http://dx.doi.org/10.1016/0016-2361(91)90192-D[Crossref]
  • [53] P.S. Kokorotsikos, G.G. Stavropoulos, G.P. Sakellaropoulos, Fuel 65, 1462 (1986) http://dx.doi.org/10.1016/0016-2361(86)90124-9[Crossref]
  • [54] G.E.P. Box, J.S. Hunter, W.G. Hunter, Statistics for Experiments, 2nd edition (Wiley & Sons, New Jersey, 2005)
  • [55] H.E. Klei, J. Sahagian, D.W. Sundstrom, Ind. Eng. Chem. Process Des. Dev. 14, 470 (1975) http://dx.doi.org/10.1021/i260056a020[Crossref]
  • [56] T. Wigmans, P. Tramp, J.A. Moulijn, Carbon 22, 319 (1984) http://dx.doi.org/10.1016/0008-6223(84)90179-9[Crossref]
  • [57] A. Pande, FUEL 71, 1299 (1992) http://dx.doi.org/10.1016/0016-2361(92)90057-U[Crossref]
  • [58] J.F. Strange, P.L. Walker Jr, Carbon 14, 345 (1976) http://dx.doi.org/10.1016/0008-6223(76)90008-7[Crossref]
  • [59] S. Yagi and D. Kunii, Studies on combustion of carbon particles in flames and fluidized beds, Proceedings of 5th (int.) Symposium on Combustion (Reinhold, New York, 1955) 231
  • [60] A.A. Lizzio, L.R. Radovic, Ind. Eng. Chem. Res. 30, 1735 (1991) http://dx.doi.org/10.1021/ie00056a009[Crossref]
  • [61] A.A. Adjorlolo, Y.K. Rao, Carbon 22(2), 173 (1984) http://dx.doi.org/10.1016/0008-6223(84)90207-0[Crossref]
Document Type
Publication order reference
YADDA identifier
bwmeta1.element.-psjd-doi-10_2478_s11532-013-0248-x
Identifiers
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.