PL EN


Preferences help
enabled [disable] Abstract
Number of results
Journal
2003 | 1 | 4 | 366-386
Article title

Composition of extraction products from alkylated high-sulphur coals

Content
Title variants
Languages of publication
EN
Abstracts
EN
Products of reductive and non-reductive methylation of two high-sulphur coals (Mequinenza and Illinois No. 6) have been extracted by dichloromethane. It has been established that the efficiency of the transformation of coal to the products soluble in CH2Cl2 is higher for coals subjected to non-reductive methylation by the Liotta method than for those after reduction in the potassium/liquid ammonia system. The extracts and the extraction residues were subjected to elemental analysis, IR spectroscopy, and AP-TPR (Atmospheric Pressure-Temperature Programmed Reduction) measurements. It has been shown that the main species undergoing extraction by CH2Cl2 are aliphatic compounds or aromatic structures of low degree of condensation. The effect of the extraction on the sulphur groups in coal has been discussed.
Publisher

Journal
Year
Volume
1
Issue
4
Pages
366-386
Physical description
Dates
published
1 - 12 - 2003
online
1 - 12 - 2003
Contributors
  • Faculty of Chemistry, Adam Mickiewicz University, Grunwaldzka 6, 60-780, Poznań, Poland, mkozlow@amu.edu.pl
  • Faculty of Chemistry, Adam Mickiewicz University, Grunwaldzka 6, 60-780, Poznań, Poland
author
  • Laboratory of Applied Chemistry, CMK, Limburgs Universitair Centrum, B-3590, Diepenbeek, Belgium
References
  • [1] L.M. Stock: “The Reductive Alkylation Reaction”, In: M.L. Gorbaty, J.W. Larsen, I. Wender (Eds.). Coat Science, Academic Press, Vol. 1, New York, 1982, pp. 161–282
  • [2] H. Wachowska and M. Kozłowski: “Multistage butylation of coals in a potassium-liquid ammonia system”, Fuel, Vol. 72, (1993), pp. 435–442. http://dx.doi.org/10.1016/0016-2361(93)90067-C[Crossref]
  • [3] L. Lazarov, M.F. Simeonov, S.P. Marinov: “Structural analysis of alkylated coal by 1H and 13CNMR spectroscopy”, Fresenius Z. Anal. Chem., Vol. 319, (1984), pp. 552–555. http://dx.doi.org/10.1007/BF00487636[Crossref]
  • [4] H.W. Sternberg, C.L. Delle Donne, P. Pentages, E.C. Moroni, R.E. Markby: “Solubilization of an lvb coal by reductive alkylation”, Fuel, Vol. 50, (1971), pp. 432–442. http://dx.doi.org/10.1016/0016-2361(71)90030-5[Crossref]
  • [5] K. Niemann and U.B. Richter: “Studies int he chemical characterization of coal: reduction”, Fuel, Vol. 58, (1979), pp. 838–840. http://dx.doi.org/10.1016/0016-2361(79)90197-2[Crossref]
  • [6] M. Miyake, M. Sukigara, M. Nomura, S. Kikkawa: “Improved method to alkylate Yubari coal of Japan using molten potassium under refluxing THF”, Fuel, Vol. 59, (1980), pp. 637–640. http://dx.doi.org/10.1016/0016-2361(80)90126-X[Crossref]
  • [7] M. Miyake, S. Yamamoto, M. Nomura: “Enhanced oil production from coal by a new reductive alkylation reaction in a glass flask”, Fuel Processing Technology, Vol. 14, (1986), pp. 201–211. http://dx.doi.org/10.1016/0378-3820(86)90022-6[Crossref]
  • [8] L. Lazarov, I. Rashkov, S. Angelov: “Direct preparation of ionic potassium-coal adducts”, Fuel, Vol. 57, (1978), pp. 637–638. http://dx.doi.org/10.1016/0016-2361(78)90194-1[Crossref]
  • [9] H. Wachowska and M. Kozłowski: “Studies of reduction and reductive alkylation of coals in the potassium/liquid ammonia system. 1. The influence of demineralization on the course of reduction and reductive alkylation of coals”, Fuel, Vol. 74, (1995), pp. 1319–1327. http://dx.doi.org/10.1016/0016-2361(95)00086-K[Crossref]
  • [10] B.S. Ignasiak, J.F. Fryer, P. Jadernik: “Polymeric structure of coal. 2. Structure and thermoplasticity of sulphur-rich Raša lignite”, Fuel, Vol. 57, (1978), pp. 578–584. http://dx.doi.org/10.1016/0016-2361(78)90186-2[Crossref]
  • [11] R. Liotta: “Selective alkylation of acidic hydroxyl groups in coal”, Fuel, Vol. 58, (1979), pp. 724–728. http://dx.doi.org/10.1016/0016-2361(79)90069-3[Crossref]
  • [12] J.W. Larsen and E.W. Kuemmerle: “Alkylation and depolymerization reactions of coal: a selective review with supplementary experiments”, Fuel, Vol. 55, (1976), pp. 162–169. http://dx.doi.org/10.1016/0016-2361(76)90081-8[Crossref]
  • [13] H. Wachowska, M. Kozłowski, J. Thiel, I. Dunajska-Szopka: “Studies of the effects of O-alkylation on the extractability of demineralized and reduced Polish coals”, Fuel Processing Technology, Vol. 29, (1991), pp. 143–151. http://dx.doi.org/10.1016/0378-3820(91)90024-7[Crossref]
  • [14] B. Ignasiak, D. Carson, M. Gawlak: “Non-destructive solubilization of coal”, Fuel, Vol. 58, (1979), pp. 833–834. http://dx.doi.org/10.1016/0016-2361(79)90193-5[Crossref]
  • [15] L.B. Alemany and L.M. Stock: “Reductive alkylation of Illinois No. 6 coal.1H and 13C n.m.r. spectra of the 13C-enriched alkylation products”, Fuel, Vol. 61, (1982), pp. 1088–1094. http://dx.doi.org/10.1016/0016-2361(82)90191-0[Crossref]
  • [16] M. Kozłowski, H. Wachowska, P. Adriaensens, J. Gelan: “IR and NMR characterisation of extraction products of reductively deuteromethylated coals”, Fuel, Vol. 78, (1999), pp. 1881–1884. http://dx.doi.org/10.1016/S0016-2361(99)00102-7[Crossref]
  • [17] L. Lazarov and S.P. Marinov: “Modeling the structure of a coking coal”, Fuel Processing Technology, Vol. 15, (1987), pp. 411–422. http://dx.doi.org/10.1016/0378-3820(87)90062-2[Crossref]
  • [18] M. Kozłowski, H. Wachowska, J. Yperman: “Reductive and non-reductive methylation of high-sulphur coals studied by atmospheric pressure-temperature programmed reduction technique”, Feul, Vol. 82, (2003), pp. 1041–1047. http://dx.doi.org/10.1016/S0016-2361(03)00018-8[Crossref]
  • [19] W. Radmacher and P. Mohrhauer: “Demineralizing of coal for analytical purposes”, Brennstoff-Chemie, Vol. 37, (1956), pp. 353–358.
  • [20] Polish Standard PN-76/G-04514.02: “Solid fuels. Determination of total sulphur by the high-temperature combustion method”
  • [21] J. Yperman, I.I. Maes, H. Van den Rul, S. Mullens, J. Van Aelst, D.V. Franco, J. Mullens, L.C. Van Poucke: “Sulphur group analysis in solid matrices by atmospheric pressure-temperature programmed reduction”, Analytica Chimica Acta, Vol. 395, (1999), pp. 143–155. http://dx.doi.org/10.1016/S0003-2670(99)00362-1[Crossref]
  • [22] M. Kozłowski, H. Wachowska, J. Yperman, D.V. Franco, J. Mullens, L.C. Van Poucke: “Atmospheric-pressure temperature-programmed reduction study of high-sulfur coals reduced in a potassium/liquid ammonia system”, Energy & Fuels, Vol. 12, (1998), pp. 1142–1147. http://dx.doi.org/10.1021/ef970223j[Crossref]
  • [23] M. Avram and G.D. Mateescu: Infrared Spectroscopy, Robert E. Krieger Publishing Company, New York, 1978, pp. 323.
  • [24] V.I. Stenberg, R.J. Baltisberger, K.M. Patal, K. Raman, N.F. Woolsey: “The role of noncovalent bonding in coal”, In: M.L. Gorbaty, J.W. Larsen, I. Wender (Eds.): Coal Science, Vol. 2, Academic Press, New York, 1983, pp. 125–171.
  • [25] E. Yaĝmur, B. Çiçek, A. Olcay: “Effect of O-methylation on solubility and swelling of coals”, Fuel Processing Technology, Vol. 67, (2000), pp. 191–204. http://dx.doi.org/10.1016/S0378-3820(00)00100-4[Crossref]
  • [26] M. Smith: “Dissolving metal reductions”, In: R.L. Augustine (Ed.): Reduction. Techniques and Applications in Organic Synthesis, Marcel Dekker, New York, 1968, pp. 95–170.
  • [27] K. Ismail, S.C. Mitchell, S.D. Brown, C.E. Snape, A.C. Buchanan III, P.F. Britt, D.V. Franco, I.I. Maes, J. Yperman: “Silica-immobilized sulfur compounds as solid calibrants for temperature-programmed reduction and probes for the thermal behavior of organic sulfur forms in fossil fuels”, Energy & Fuels, Vol. 9, (1995), pp. 707–716. http://dx.doi.org/10.1021/ef00052a020[Crossref]
  • [28] I.I. Maes, J. Yperman, H. Van den Rul, D.V. Franco, J. Mullens, L.C. Van Poucke, G. Gryglewicz, P. Wilk: “Study of coal-derived pyrite and its conversion products using atmospheric pressure temperature-programmed reduction”, Energy & Fuels, Vol. 9, (1995), pp. 950–955. http://dx.doi.org/10.1021/ef00054a002[Crossref]
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.-psjd-doi-10_2478_BF02475223
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.