PL EN


Preferences help
enabled [disable] Abstract
Number of results
Journal
2015 | 13 | 1 |
Article title

Nanocrystalline ferrites used as adsorbent in the
treatment process of waste waters resulted from
ink jet cartridges manufacturing

Content
Title variants
Languages of publication
EN
Abstracts
EN
Dye pollution in waste waters causes serious
environmental and health risk, legislation problems
and is a serious challenge to environmental scientists.
In this work the treatment of waste waters resulted
from ink jet cartridges manufacturing, using different
nanocrystalline ferrites MIIFe2O4 (MII = Mg, Cu) as
adsorbent materials, has been investigated. The ferrites
were obtained by thermal decomposition at 500°C of
the magnesium and copper ferrioxalate coordination
compounds. The nanocrystalline ferrites powder was
investigated by various methods such as XRD, IR,
SEM and EDX. The discoloration of the waste waters
has been spectrophotometrically studied. The ferrites
could be removed easily after adsorption by using
a magnetic filtration process. The results indicated that
the maximum adsorption efficiency was obtained after
60 min of treatment, magnesium ferrite showing a higher
efficiency than the copper ferrite in the treatment process
of waters resulted from ink jet cartridges manufacturing.
EN
Publisher

Journal
Year
Volume
13
Issue
1
Physical description
Dates
received
13 - 11 - 2014
online
3 - 2 - 2015
accepted
8 - 12 - 2014
Contributors
author
  • University Politehnica
    Timisoara, Faculty for Industrial Chemistry and Environmental
    Engineering, Bv. Parvan no. 6, Timisoara, RO–300223, Romania
author
  • University Politehnica
    Timisoara, Faculty for Industrial Chemistry and Environmental
    Engineering, Bv. Parvan no. 6, Timisoara, RO–300223, Romania
author
  • University Politehnica
    Timisoara, Faculty for Industrial Chemistry and Environmental
    Engineering, Bv. Parvan no. 6, Timisoara, RO–300223, Romania
  • University Politehnica
    Timisoara, Faculty for Industrial Chemistry and Environmental
    Engineering, Bv. Parvan no. 6, Timisoara, RO–300223, Romania
author
  • University Politehnica
    Timisoara, Faculty for Industrial Chemistry and Environmental
    Engineering, Bv. Parvan no. 6, Timisoara, RO–300223, Romania
  • University Politehnica
    Timisoara, Faculty for Industrial Chemistry and Environmental
    Engineering, Bv. Parvan no. 6, Timisoara, RO–300223, Romania
  • Banat’s University of
    Agricultural Sciences and Veterinary Medicine „Regele Mihai I
    al Romaniei“ from Timisoara, 300645, Calea Aradului, no. 119,
    Romania
References
  • [1] Louhichi B., Bensalah N., Comparative study of the treatment ofprinting ink wastewater by conductive–diamond electrochemicaloxidation, Fenton process, and ozonation, Sustain. Environ.Res, 2014, 24, 49–58
  • [2] Zhang G.J., Liu Z.Z., Song L.F., Hu J.Y., Ong S.L, Ng W.J, Post–treatment of banknote printing works wastewater ultrafiltrationconcentrate, Water Res., 2004, 38, 3587–3595
  • [3] Saint Amand F.J., Hydrodynamics of deinking flotation, Int.J. Min. Proc., 1999, 56, 277–316
  • [4] Viesturs U., Leite M., Eisimonte M., Eremeeva T., Treimanis A.,Biological deinking technology for the recycling of office wastepapers, Bioresource Technol., 1999, 67, 255–265
  • [5] Ma X.J., Xia H.L., Treatment of water–based printing inkwastewater by Fenton process combined with coagulation,J. Hazard. Mater., 2009, 162, 386–390[WoS]
  • [6] Wang L., Li J., Wang Y., Zhao L., Jiang Q., Adsorption capabilityfor Congo red on nanocrystalline MFe2O4 (M = Mn, Fe, Co, Ni)spinel ferrites, Chem. Eng. J., 2012, 181–182, 72–79
  • [7] Iram M., Guo C., Guan Y., Ishfaq A., Liu H., Adsorption andmagnetic removal of neutral red dye from aqueous solutionusing Fe3O4 hollow nanospheres, J. Hazard. Mater., 2010, 181,1039–1050[WoS]
  • [8] Wu J.S., Liu C.H., Chu K.H., Suen S.Y., Removal of cationic dyemethyl violet 2B from water by cation exchange membranes,J. Membrane Sci., 2008, 309, 239–245[WoS]
  • [9] Vîrlan C., Ciocârlan R. G., Roman T., Gherca D., Cornei N., PuiA., Studies on adsorption capacity of cationic dyes on severalmagnetic nanoparticles, Acta Chemica Iasi, 2013, 21, 19–30
  • [10] Metes A., Koprivanac N., Glasnovic A., Flocculation as a treatmentmethod for printing ink wastewater, Water Environ. Res., 2000,72, 680–688
  • [11] Nandy T., Shastry S., Pathe P.P., Kaul S.N., Pre–treatmentof currency printing ink wastewater through coagulation–flocculation process, Water Air and Soil Pollution, 2003, 148,15–30
  • [12] Roussy J., Chastellan P., Vooren M. van, Guibal E., Treatment ofink–containing wastewater by coagulation/flocculation usingbiopolymers, Water SA, 2005, 31, 369–376
  • [13] Fernandez J., Kiwi J., Lizama C., Freer J., Baeza J., MansillaH.D., Factorial experimental design of orange II photocatalyticdiscoloration process, J. Photochem. Photobiol. A, 2002, 151,213–219
  • [14] Ersu C.B., Braida W., Chao K.P., Ong S.K., Ultrafiltration of ink andlatex wastewaters using cellulose membranes, Desalination,2004, 164, 63–70
  • [15] Purkait M.K., Maiti A., DasGupta S., De S., Removal of Congo redusing activated carbon and its regeneration, J. Hazard. Mater.,2007, 145, 287–295[WoS]
  • [16] Xiang–yu H., Jing F., Xiao–han L., Mi–lin Z., Comparable Studiesof Adsorption and Magnetic Properties of Ferrite MnFe2O4Nanoparticles, Porous Bulks and Nanowires, Chem. Res. inChinese Universities, 2011, 27, 543–546
  • [17] Mayo J.T., Yavuz C., Yean S., Cong L., Shipley H., Yu W., FalknerJ., Kan A., Tomson M., Colvin V.L., The effect of nanocrystallinemagnetite size on arsenic removal, Sci. Technol. Adv. Mater.,2007, 8, 71–75[Crossref][WoS]
  • [18] Casbeer E., Virender K.S., Li X.Z., Synthesis and photocatalyticactivity of ferrites under visible light: A review, Sep. Purif.Technol., 2012, 87, 1–14[WoS]
  • [19] Liu Q., Wang L., Xiao A., Gao J., Ding W., Yu H., Huo J., Ericson M.,Templated preparation of porous magnetic microspheres andtheir application in removal of cationic dyes from wastewater,J. Hazard. Mater., 2010, 181, 586–592[WoS]
  • [20] Tai Y., Wang L., Fan G., Gao J.M., Yu H., Zhang L., Recent researchprogress on the preparation and application of magneticnanospheres, Poly. Int., 2011, 60, 976–994
  • [21] Dumitru R., Papa F., Balint I., Culita D., Munteanu C., Stanica N.,Ianculescu, A., Diamandescu, L., Carp O., Mesoporous cobaltferrite: A rival of platinum catalyst in methane combustionreaction, Appl. Catal. A: Gen., 2013, 467, 178–186
  • [22] Modi K.B., Chhantbar M.C., Joshi H.H., Study of elastic behaviourof magnesium ferrialuminates, Ceram. Int., 2006, 32, 111–114[Crossref]
  • [23] Gingasu D., Mindru I., Patron L., Cizmas C.B., Tetragonal copperferrite obtained by self–propagating combustion, J. Alloy.Compd, 2008, 460, 627–631[WoS]
  • [24] Balavijayalakshmi J., Saranya M., Synthesis and Characterizationof Copper doped Magnesium ferrite nanoparticles, J. NanoSci.NanoTechno. 2014, 2, 397–399
  • [25] Suryanarayana C., Norton M.G., X–Ray Diffraction A PracticalApproach, Plenum Press, New York, 2008
  • [26] Nejati K., Zabihi R., Preparation and magnetic of nano sizenickel ferrite particles using hydrothermal method, Chem. Cent.J., 2012, 6, 1–6[WoS][Crossref]
  • [27] Naidek K.P., Bianconi F., da Rocha T.C., Zanchet D., Bonacin J.A.,Novak M.A., Vaz Md, Winnischofer H., Structure and morphologyof spinel MFe2O4 (M=Fe, Co, Ni) nanoparticles chemicallysynthesized from heterometallic complexes, J. Colloid Inter.Sci., 2011, 358, 39–46
  • [28] Chauhan S.S., Ojha C., Srivastava A.K., Synthesis andcharacterization of CuFe2O4 nanoparticles, Int. J. Theor. & App.Sci., 2009, 1, 9–11
  • [29] Gao Z., Cui F., Zeng S., Guo L., Shi J., A high surface areasuperparamagnetic mesoporous spinel ferrite synthesized bya template–free approach and its adsorbative property,Micropor. Mesopor. Mat., 2010, 132, 188–195
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.-psjd-doi-10_1515_chem-2015-0092
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.